SMD code 2529CD
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
The only part printed 2529CD in our tables
SGM2529CXTD10G
- What it is
- Not recorded
- Maker
- SG Micro
- Package
- DFN
- Pins
- 10
- Details
- 5A, 5V Electronic Fuse (eFuse) with Thermal Shutdown
- Source
- Manufacturer datasheet
Is it dead?
Ohms range or continuity, across it.
Working, it reads
Near 0 Ω, a beep. Small ratings read a few ohms.
Dead, it reads
- Open: blown.
- On the board:
- An open reading means the same on the board.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A blown fuse means something after it drew too much. Find that short before fitting a new fuse, or it blows again.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Datasheetfor SGM2529CXTD10G, opens in a new tab
Was it this one?
Did you find your part?
Open this in the search to correct a character or try another package.