SMD code SMBJ250A
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
SMBJ250A is a part number in our tables
SMBJ250A
- What it is
- TVS diode
- Maker
- DOWO, Good-Ark, Hottech, JieJie, ProTek Devices, SOCAY, HXY, Bourns, Leimao Electronic Technology, Lucky Forest, Rectron, Ruilong Yuan Electronics, Secos, Socay Electronics, StarHope, Starsea Electronic, Yint Electronics
- Package
- SMB
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead?
Diode range, from the protected line to ground, part lifted if you can.
Working, it reads
A one-way part reads about 0.6 to 0.8 V forward and open in reverse. A two-way part reads open both ways. Arrays with several lines read as the datasheet's diagram draws them.
Dead, it reads
- From the line to ground, the same reading both ways, near 0 V with a continuous beep: shorted.
- A reading both ways on a one-way part: leaky.
- A one-way part open both ways: failed open.
- On the board
- , a line reading shorted to ground can be this part or anything else on that line. Lift it: if the short goes with it, it has failed.
- Compare:
- The same part on the next line or connector pin is the healthy reading to compare with.
- Watch for:
- A two-way part reads open both ways when it is good, exactly like one that has failed open. The meter cannot tell them apart; an identical part on the next line can.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Codes printed on it
Each maker prints its own code, and each code has a page of its own.
- PZDOWO, SMB
- PZGood-Ark, SMBDatasheet for SMBJ250A, Good-Ark, opens in a new tab
- PZHottech, SMBDatasheet for SMBJ250A, Hottech, opens in a new tab
- QGJieJie, SMBDatasheet for SMBJ250A, JieJie, opens in a new tab
- PZProTek Devices, SMBDatasheet for SMBJ250A, ProTek Devices, opens in a new tab
- PZSOCAYDatasheet for SMBJ250A, SOCAY, opens in a new tab
- PZHXY, SMBDatasheet for SMBJ250A, HXY, opens in a new tab
- PZBourns, SMB
- QGLeimao Electronic Technology, SMB
- PZLucky Forest, SMB
- TB250ARectron, SMB
- PZRuilong Yuan Electronics, SMB
- BJ250ASecos, SMB
- PZSocay Electronics, SMB
- PZStarHope, SMB
- QGStarsea Electronic, SMB
- PZYint Electronics, SMB
The only part printed SMBJ250A in our tables
TSMBJ250A
- What it is
- TVS diode
- Maker
- Galaxy Microelectronics
- Package
- SMB
- Pins
- 2
- Details
- 250V, 600W, Surface Mount TVS
- Source
- Manufacturer datasheet
Is it dead?
Diode range, from the protected line to ground, part lifted if you can.
Working, it reads
A one-way part reads about 0.6 to 0.8 V forward and open in reverse. A two-way part reads open both ways. Arrays with several lines read as the datasheet's diagram draws them.
Dead, it reads
- From the line to ground, the same reading both ways, near 0 V with a continuous beep: shorted.
- A reading both ways on a one-way part: leaky.
- A one-way part open both ways: failed open.
- On the board
- , a line reading shorted to ground can be this part or anything else on that line. Lift it: if the short goes with it, it has failed.
- Compare:
- The same part on the next line or connector pin is the healthy reading to compare with.
- Watch for:
- A two-way part reads open both ways when it is good, exactly like one that has failed open. The meter cannot tell them apart; an identical part on the next line can.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Was it this one?
Did you find your part?
Open this in the search to correct a character or try another package.