Skip to content

SMD code 047

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

5 parts are printed 047

Not sure which one you have?

Answer up to 4 quick questions and these 5 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • SGM811C-JXKA4GSOT-143Voltage supervisor, 4 pins, SG MicroVoltage supervisorSOT-1434 pinsSG Micro
    What it is
    Voltage supervisor
    Maker
    SG Micro
    Package
    SOT-143
    Pins
    4
    Details
    4.05 V threshold, SGM811C Microprocessor Supervisory Circuits with Manual Reset Input
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Integrated circuit.

  • FCX1047ASOT-893 pins, Diodes IncorporatedNot recordedSOT-893 pinsDiodes Incorporated
    What it is
    Not recorded
    Maker
    Diodes Incorporated
    Package
    SOT-89
    Pins
    3
    Details
    npn sw 10V 4A 2W
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • SO3570RSOT-233 pins, Compagnie générale de télégraphie Sans Fil (Thomson-CSF)Not recordedSOT-233 pinsCompagnie générale de télégraphie Sans Fil (Thomson-CSF)
    What it is
    Not recorded
    Maker
    Compagnie générale de télégraphie Sans Fil (Thomson-CSF)
    Package
    SOT-23
    Pins
    3
    Details
    equivalent 2N3570
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • XC6101A538MRSOT-23-5Voltage supervisor, 5 pins, TorexVoltage supervisorSOT-23-55 pinsTorex
    What it is
    Voltage supervisor
    Maker
    Torex
    Package
    SOT-23-5
    Pins
    5
    Details
    CMOS-IC: VDet 3.8V, 5%, Hst, -MR, -Reset PPO, Wt=400ms, Rt=3.13ms
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • 1 more part has no package on record
    • TE35703 pins, Compagnie générale de télégraphie Sans Fil (Thomson-CSF)Not recordedNot recorded3 pinsCompagnie générale de télégraphie Sans Fil (Thomson-CSF)
      What it is
      Not recorded
      Maker
      Compagnie générale de télégraphie Sans Fil (Thomson-CSF)
      Package
      Not recorded
      Pins
      3
      Details
      equivalent 2N3570
      Source
      Published code list

      Is it dead? The meter test is below: This part.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Integrated circuit

Voltage with the board powered; ohms from each pin to ground with it off.

Working, it reads

Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.

Dead, it reads

  • A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
  • Supply present, output stuck: failed, or its load has.
On the board:
A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
Compare:
The surest reference is the same IC on a working board, measured pin by pin.
Watch for:
Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as 047

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Codes that begin with 047

For a marking with its end worn or burnt off. Each code has a page of its own.

Codes not listed here are printed on 330 more parts.

Did you find your part?

Open this in the search to correct a character or try another package.