Skip to content

SMD code 24M

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

24M on a chip resistor

24 MΩ

24 MΩ resistor

The M is both the decimal point and the multiplier: 24 MΩ.

Check it with a meter

Lift one end and measure across it. A good one reads 24 MΩ. Measuring it in circuit reads the parallel combination of everything around it, which is almost always lower, never higher: well above 24 MΩ on the board is a fault. Open, or well above 24 MΩ, means it has failed: burnt, cracked or corroded. That does not change what to fit: the marking still says 24 MΩ. A burnt resistor usually means the part it feeds drew too much, so find that before fitting a new one.

On a transistor or diode body (SOT-23, SOT-23-5, SOT-353), 24M is a part code instead. Those parts are listed below.

Not sure which one you have?

Answer up to 4 quick questions and these 41 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • AP6213A-10DLNPASOT-23-5LDO regulator, 5 pins, Anwell SemiconductorLDO regulatorSOT-23-55 pinsAnwell Semiconductor
    What it is
    LDO regulator
    Maker
    Anwell Semiconductor
    Package
    SOT-23-5
    Pins
    5
    Details
    Linear voltage regulator IC: LDO, 1.0V±2%, 300mA. -CE, PDR
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • AP6213A-10DLNPA1SOT-23-5LDO regulator, 5 pins, Anwell SemiconductorLDO regulatorSOT-23-55 pinsAnwell Semiconductor
    What it is
    LDO regulator
    Maker
    Anwell Semiconductor
    Package
    SOT-23-5
    Pins
    5
    Details
    Linear voltage regulator IC: LDO, 1.0V±1%, 300mA. -CE, PDR
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • AP6213A-10DLNPPSOT-353LDO regulator, 5 pins, Anwell SemiconductorLDO regulatorSOT-3535 pinsAnwell Semiconductor
    What it is
    LDO regulator
    Maker
    Anwell Semiconductor
    Package
    SOT-353
    Pins
    5
    Details
    Linear voltage regulator IC: LDO, 1.0V±2%, 300mA. -CE, PDR
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • AP6213A-10DLNPP1SOT-353LDO regulator, 5 pins, Anwell SemiconductorLDO regulatorSOT-3535 pinsAnwell Semiconductor
    What it is
    LDO regulator
    Maker
    Anwell Semiconductor
    Package
    SOT-353
    Pins
    5
    Details
    Linear voltage regulator IC: LDO, 1.0V±1%, 300mA. -CE, PDR
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • IXD1216D202FRSOT-223IXYSNot recordedSOT-223Not recordedIXYS
    What it is
    Not recorded
    Maker
    IXYS
    Package
    SOT-223
    Pins
    Not recorded
    Details
    Linear voltage regulator IC: 2.0V±2%, 150mA
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • IXD1216D202JRDPAK3 pins, IXYSNot recordedDPAK3 pinsIXYS
    What it is
    Not recorded
    Maker
    IXYS
    Package
    DPAK
    Pins
    3
    Details
    Linear voltage regulator IC: 2.0V±2%, 150mA
    Source
    Published code list

    Is it dead? The meter test is below: Voltage regulator.

  • 9 more parts have no package on record
    • AP6213A-10DLNGU1LDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±1%, 300mA. -CE, PDR, H-free
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNGWLDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±2%, 300mA, -CE, PDR, H-free
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNGW1LDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±1%, 300mA, -CE, PDR, H-free
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPSLDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±2%, 300mA, -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPS1LDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±1%, 300mA, -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPULDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±2%, 300mA. -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPU1LDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±1%, 300mA. -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPWLDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±2%, 300mA, -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

    • AP6213A-10DLNPW1LDO regulator, Anwell SemiconductorLDO regulatorNot recordedNot recordedAnwell Semiconductor
      What it is
      LDO regulator
      Maker
      Anwell Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Linear voltage regulator IC: LDO, 1.0V±1%, 300mA, -CE, PDR
      Source
      Published code list

      Is it dead? The meter test is below: Voltage regulator.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Voltage regulator

Voltage, board powered, black probe on ground. Then ohms with the power off.

Working, it reads

Input pin at the supply, output pin at its rated voltage, and the enable pin high if it has one.

Dead, it reads

  • Output equal to the input: the pass element has shorted. Everything after it may have taken the full input.
  • Input present, enable high, no output: failed open, or holding itself off into a shorted load. Power off and measure output to ground.
  • Power off, input to output near 0 Ω: shorted.
On the board:
An output at 0 V is often a shorted load with the regulator in current limit. Lift the output pin: if the short stays on the board, the regulator may be fine.
Compare:
The same regulator on another rail or another board shows the right voltages and the right resistances.
Watch for:
Makers put input, output and ground on different pins in the same package, so take them from this part's datasheet. Diode or ohms readings between its pins say little; check it powered.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.