Skip to content

SMD code A7p

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

The last letter, p, is lower case, which on NXP and Philips parts is a date or factory code, so it was set aside and A7 was searched.

266 parts are printed A7p

Not sure which one you have?

Answer up to 4 quick questions and these 50 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • 74AUP1T57GWSOT-3636 pins, NXPNot recordedSOT-3636 pinsNXP
    What it is
    Not recorded
    Maker
    NXP
    Package
    SOT-363
    Pins
    6
    Details
    CMOS logic IC: Configurable gate with voltage-level translator
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • AP431AWSOT-233 pins, AnachipNot recordedSOT-233 pinsAnachip
    What it is
    Not recorded
    Maker
    Anachip
    Package
    SOT-23
    Pins
    3
    Details
    Vref-IC: Adjustable, Precision, Shunt, 2,495V±0,5%
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • Bav99SOT-23Switching diode, 3 pins, Fairchild SemiconductorSwitching diodeSOT-233 pinsFairchild Semiconductor
    What it is
    Switching diode
    Maker
    Fairchild Semiconductor
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99LT1SOT-233 pins, onsemiNot recordedSOT-233 pinsonsemi
    What it is
    Not recorded
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • BAV99LT1GSOT-233 pins, onsemiNot recordedSOT-233 pinsonsemi
    What it is
    Not recorded
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Details
    Diodes
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99PTSOT-233 pins, Chenmko EnterpriseNot recordedSOT-233 pinsChenmko Enterprise
    What it is
    Not recorded
    Maker
    Chenmko Enterprise
    Package
    SOT-23
    Pins
    3
    Details
    Diode: Dual, Sw, 85V, 150mA, Vf<1.25V(150mA), 4ns
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99SSOT-363Switching diode, 6 pins, InfineonSwitching diodeSOT-3636 pinsInfineon
    What it is
    Switching diode
    Maker
    Infineon
    Package
    SOT-363
    Pins
    6
    Details
    0.2A, 75V, Surface Mount Small Signal Switching Diodes
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99TSOT-416Switching diode, 3 pins, InfineonSwitching diodeSOT-4163 pinsInfineon
    What it is
    Switching diode
    Maker
    Infineon
    Package
    SOT-416
    Pins
    3
    Details
    0.5A, 85V, Surface Mount Small Signal Switching Diodes
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99TPTSOT-4163 pins, Chenmko EnterpriseNot recordedSOT-4163 pinsChenmko Enterprise
    What it is
    Not recorded
    Maker
    Chenmko Enterprise
    Package
    SOT-416
    Pins
    3
    Details
    Diode: Dual, Sw, 85V, 150mA, Vf<1.25V(150mA), 4ns
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99USOT-3233 pins, ROHMNot recordedSOT-3233 pinsROHM
    What it is
    Not recorded
    Maker
    ROHM
    Package
    SOT-323
    Pins
    3
    Details
    Si-diode: Dual, U-Speed, 80V, 100mA, Vf<1,2V(100mA), 0,5pF, 4ns
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99WPTSOT-3233 pins, Chenmko EnterpriseNot recordedSOT-3233 pinsChenmko Enterprise
    What it is
    Not recorded
    Maker
    Chenmko Enterprise
    Package
    SOT-323
    Pins
    3
    Details
    Diode: Dual, Sw, 85V, 150mA, Vf<1.25V(150mA), 4ns
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BAV99WT1SOT-323Switching diode, 3 pinsSwitching diodeSOT-3233 pinsNot recorded
    What it is
    Switching diode
    Maker
    Not recorded
    Package
    SOT-323
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • 3 more parts have no package on record
    • 74AUP1T57GNNXPNot recordedNot recordedNot recordedNXP
      What it is
      Not recorded
      Maker
      NXP
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS logic IC: Configurable gate with voltage-level translator
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • 74AUP1T57GSNXPNot recordedNot recordedNot recordedNXP
      What it is
      Not recorded
      Maker
      NXP
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS logic IC: Configurable gate with voltage-level translator
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • BD45E271G-MVoltage supervisor, ROHMVoltage supervisorNot recordedNot recordedROHM
      What it is
      Voltage supervisor
      Maker
      ROHM
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 2.7V±1%, -MR, -Reset ODO, Rdt=100ms
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Integrated circuit

Voltage with the board powered; ohms from each pin to ground with it off.

Working, it reads

Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.

Dead, it reads

  • A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
  • Supply present, output stuck: failed, or its load has.
On the board:
A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
Compare:
The surest reference is the same IC on a working board, measured pin by pin.
Watch for:
Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.