Skip to content
WhatSMDSign in

SMD code BNCH

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

3 parts are printed BNCH

Not sure which one you have?

Answer up to 4 quick questions and these 3 parts are ranked, with a meter test that settles it. It works on a dead part too.

all EM Microelectronic-Marin SA. What differs:

  • EM6325CXSC4B-2.9+SOT-3434 pinsSOT-3434 pins
    What it is
    Not recorded
    Maker
    EM Microelectronic-Marin SA
    Package
    SOT-343
    Pins
    4
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • EM6325CXSC5B-2.9+SOT-3535 pinsSOT-3535 pins
    What it is
    Not recorded
    Maker
    EM Microelectronic-Marin SA
    Package
    SOT-353
    Pins
    5
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • EM6325CXSP5B-2.9+SOT-23-55 pinsSOT-23-55 pins
    What it is
    Not recorded
    Maker
    EM Microelectronic-Marin SA
    Package
    SOT-23-5
    Pins
    5
    Source
    Published code list

    Is it dead? The meter test is below: This part.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.