SMD code CMBYG
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
The only part printed CMBYG in our tables
SGM38042A-5YG
- What it is
- Not recorded
- Maker
- SG Micro
- Package
- Not recorded
- Pins
- 15
- Details
- Single Inductor Triple Output AMOLED Display Power Supply
- Source
- Manufacturer datasheet
Is it dead?
Ohms range across it, lowest range.
Working, it reads
Near 0 Ω: from a few milliohms to a few ohms, depending on the part. The datasheet gives it as DC resistance.
Dead, it reads
- Open: a broken or burnt winding. The failure a meter can see.
- On the board:
- An open reading means the same on the board: nothing in parallel can make a good winding read open.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- Shorted turns still read near 0 Ω. Only an inductance meter, or comparing with an identical part, shows them.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Datasheetfor SGM38042A-5YG, opens in a new tab
Was it this one?
Did you find your part?
Open this in the search to correct a character or try another package.