Skip to content

SMD code S23

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 32 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • S-SM230AFSMAFSchottky diode, 2 pins, LRCSchottky diodeSMAF2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SMAF
    Pins
    2
    Details
    Schottky diode, VR 30 V, IF 2 A, VF Max 0.55 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SFM23SMARectifier, 2 pins, Formosa MicrosemiRectifierSMA2 pinsFormosa Microsemi
    What it is
    Rectifier
    Maker
    Formosa Microsemi
    Package
    SMA
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SFM23-Q1SMARectifier, 2 pins, Formosa MicrosemiRectifierSMA2 pinsFormosa Microsemi
    What it is
    Rectifier
    Maker
    Formosa Microsemi
    Package
    SMA
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SM230ASMASchottky diode, 2 pins, LRCSchottky diodeSMA2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SMA
    Pins
    2
    Details
    Schottky diode, VR 30 V, IF 2 A, VF Max 0.55 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SM230AFSMAFSchottky diode, 2 pins, LRCSchottky diodeSMAF2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SMAF
    Pins
    2
    Details
    Schottky diode, VR 30 V, IF 2 A, VF Max 0.55 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SM230BSMBSchottky diode, 2 pins, LRCSchottky diodeSMB2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SMB
    Pins
    2
    Details
    Schottky diode, VR 30 V, IF 2 A, VF Max 0.5 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SM230BFSMBFSchottky diode, 2 pins, LRCSchottky diodeSMBF2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SMBF
    Pins
    2
    Details
    Schottky diode, VR 30 V, IF 2 A, VF Max 0.55 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SMS2310-CSOT-23MOSFET, 3 pins, SeCoSMOSFETSOT-233 pinsSeCoS
    What it is
    MOSFET
    Maker
    SeCoS
    Package
    SOT-23
    Pins
    3
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • SMS2310J-CSOT-23MOSFET, 3 pins, SeCoSMOSFETSOT-233 pinsSeCoS
    What it is
    MOSFET
    Maker
    SeCoS
    Package
    SOT-23
    Pins
    3
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • 6 more parts have no package on record
    • MFPS23SSchottky diode, Taitron ComponentsSchottky diodeNot recordedNot recordedTaitron Components
      What it is
      Schottky diode
      Maker
      Taitron Components
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Surface Mount Schottky Rectifiers
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Schottky diode.

    • SFM23-BSRectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM23-BS-Q1Rectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM23-LRectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM23-SFRectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM23-SF-Q1Rectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Schottky diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • A reading the wrong way round as well: leaky.
  • Open both ways: failed open.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

One way between drain and source reads about 0.4 to 0.9 V, the body diode, and the other way open. The gate reads open to both other pins.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, which reads as that resistor and is not a fault. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as S23

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Codes that begin with S23

For a marking with its end worn or burnt off. Each code has a page of its own.

Codes not listed here are printed on 24 more parts.

Did you find your part?

Open this in the search to correct a character or try another package.