Skip to content

SMD code WB

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 50 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • BZT52C6V2-FSOD-123FZener diode, 2 pins, Taitron ComponentsZener diodeSOD-123F2 pinsTaitron Components
    What it is
    Zener diode
    Maker
    Taitron Components
    Package
    SOD-123F
    Pins
    2
    Details
    Zener diode: 5.8..6.6V, Izt=5mA, 410mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZT52C6V2-VSOD-123Zener diode, 2 pins, VishayZener diodeSOD-1232 pinsVishay
    What it is
    Zener diode
    Maker
    Vishay
    Package
    SOD-123
    Pins
    2
    Details
    Zener diode: 6.2V±5%, Izt=5mA, Zzt=10, 500mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZT52C6V8-GSOD-123Zener diode, 2 pins, Taiwan SemiconductorZener diodeSOD-1232 pinsTaiwan Semiconductor
    What it is
    Zener diode
    Maker
    Taiwan Semiconductor
    Package
    SOD-123
    Pins
    2
    Details
    526.8 V Zener diode
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZT52C6V8TSOD-523Zener diode, 2 pins, Diodes IncorporatedZener diodeSOD-5232 pinsDiodes Incorporated
    What it is
    Zener diode
    Maker
    Diodes Incorporated
    Package
    SOD-523
    Pins
    2
    Details
    Z-diode: 6.8V±5%, Izt=5mA, Zzt=15Ω, 150mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-C6V2SOT-23Zener diode, 3 pins, Won-Top ElectronicsZener diodeSOT-233 pinsWon-Top Electronics
    What it is
    Zener diode
    Maker
    Won-Top Electronics
    Package
    SOT-23
    Pins
    3
    Details
    6.2 V approx. ±5% voltage regulator (Zener) diode
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-C6V2WSOT-3233 pins, Micro Commercial ComponentsNot recordedSOT-3233 pinsMicro Commercial Components
    What it is
    Not recorded
    Maker
    Micro Commercial Components
    Package
    SOT-323
    Pins
    3
    Details
    Z-diode: 6,2V±5%, 200mW
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BZX84B6V2SOT-23Zener diode, 3 pins, PanjitZener diodeSOT-233 pinsPanjit
    What it is
    Zener diode
    Maker
    Panjit
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX384-C6V2SOD-323Zener diode, 2 pins, VishayZener diodeSOD-3232 pinsVishay
    What it is
    Zener diode
    Maker
    Vishay
    Package
    SOD-323
    Pins
    2
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX384C6V2-FSOD-323Zener diode, 2 pins, Taitron ComponentsZener diodeSOD-3232 pinsTaitron Components
    What it is
    Zener diode
    Maker
    Taitron Components
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode: 5.8..6.6V, Izt=5.0mA, 200mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX384C6V2-VSOD-323Zener diode, 2 pins, VishayZener diodeSOD-3232 pinsVishay
    What it is
    Zener diode
    Maker
    Vishay
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode: 6.2V±5%, Izt=5mA, Zzt=6, 200mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX784C6V2SOD-723Zener diode, 2 pins, PanjitZener diodeSOD-7232 pinsPanjit
    What it is
    Zener diode
    Maker
    Panjit
    Package
    SOD-723
    Pins
    2
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • CZRW55C6V8-GSOD-123Zener diode, 2 pins, ComchipZener diodeSOD-1232 pinsComchip
    What it is
    Zener diode
    Maker
    Comchip
    Package
    SOD-123
    Pins
    2
    Details
    Zener diode: 6.8..7.20V, Zzt=15, Izt=5mA, 500mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • MEZ02-6.2-D3SOD-323Zener diode, 2 pins, Matsuki Electronic CompanyZener diodeSOD-3232 pinsMatsuki Electronic Company
    What it is
    Zener diode
    Maker
    Matsuki Electronic Company
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode: 5.89..6.51V, Izt=5mA, Zzt=10, 200mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • MRF1047T1SOT-323NPN transistor, 3 pins, MotorolaNPN transistorSOT-3233 pinsMotorola
    What it is
    NPN transistor
    Maker
    Motorola
    Package
    SOT-323
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: NPN transistor.

  • 1 more part has no package on record
    • KDZ13BZener diode, ROHMZener diodeNot recordedNot recordedROHM
      What it is
      Zener diode
      Maker
      ROHM
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Z-diode: 13V±2,5%, 20mA, 1W
      Source
      Published code list

      Is it dead? The meter test is below: Zener diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Zener diode

Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.

Working, it reads

About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways, forward too: failed open.
  • Holds well off its rated voltage on the supply test: drifted.
  • A soft knee, or a voltage that creeps on the supply test: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

NPN transistor

Diode range, part lifted or its base leg off the pad.

Working, it reads

Red probe on the base reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.

Dead, it reads

  • Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
  • The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
  • Only one junction reads, or none: a junction has failed open. It then looks like a diode.
  • A reading the wrong way round, where it should be open: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.