Skip to content

SMD code Y14 in SOT-23

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

26 parts in SOT-23 are printed Y14

Not sure which one you have?

Answer up to 4 quick questions and these 27 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • 2SA1608-14SOT-23NEC ElectronicsNot recordedNEC Electronics
    What it is
    Not recorded
    Maker
    NEC Electronics
    Package
    SOT-23
    Pins
    3
    Details
    Si-pnp: HF, Sw, 60V, 500mA, 150mW, B=150..300, 400MHz
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • ACZRT55C39-GSOT-23Zener diode, ComchipZener diodeComchip
    What it is
    Zener diode
    Maker
    Comchip
    Package
    SOT-23
    Pins
    3
    Details
    Zener diode: 37.0..41.0V, Izt=2.0mA, Zzt=130, 350mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-A39SOT-23Zener diode, Central SemiconductorZener diodeCentral Semiconductor
    What it is
    Zener diode
    Maker
    Central Semiconductor
    Package
    SOT-23
    Pins
    3
    Details
    39 V ±1% voltage regulator (Zener) diode
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-B39SOT-23Zener diode, Central SemiconductorZener diodeCentral Semiconductor
    What it is
    Zener diode
    Maker
    Central Semiconductor
    Package
    SOT-23
    Pins
    3
    Details
    39 V ±2% voltage regulator (Zener) diode
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-C39SOT-23Zener diode, NXPZener diodeNXP
    What it is
    Zener diode
    Maker
    NXP
    Package
    SOT-23
    Pins
    3
    Details
    39 V approx. ±5% voltage regulator (Zener) diode
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84-C39-VSOT-23Central SemiconductorNot recordedCentral Semiconductor
    What it is
    Not recorded
    Maker
    Central Semiconductor
    Package
    SOT-23
    Pins
    3
    Details
    Z-diode: 39V±5%, Zzt=40Ω(130mA), 300mW
    Source
    Published code list

    Is it dead? The meter test is below: Silicon diode.

  • BZX84B39SOT-23Zener diode, Micro Commercial ComponentsZener diodeMicro Commercial Components
    What it is
    Zener diode
    Maker
    Micro Commercial Components
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84C39LT1SOT-23Zener diode, onsemiZener diodeonsemi
    What it is
    Zener diode
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Details
    Zener diode: 37..41V, Zzt=130, Izt=5mA, 225mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • BZX84C39LT1GSOT-23Zener diode, onsemiZener diodeonsemi
    What it is
    Zener diode
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • CZRT55C39SOT-23Zener diode, ComchipZener diodeComchip
    What it is
    Zener diode
    Maker
    Comchip
    Package
    SOT-23
    Pins
    3
    Details
    Zener diode: 37.0..41.0V, Zzt=130, Izt=2mA, 350mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • SZBZX84C39LT1GSOT-23Zener diode, onsemiZener diodeonsemi
    What it is
    Zener diode
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • 1 more part has no package on record. Nothing rules it out, so it stays.
    • BZX84C39-VZener diode, VishayZener diodeVishay
      What it is
      Zener diode
      Maker
      Vishay
      Package
      Not recorded
      Pins
      Not recorded
      Source
      Published code list

      Is it dead? The meter test is below: Zener diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Zener diode

Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.

Working, it reads

About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways, forward too: failed open.
  • Holds well off its rated voltage on the supply test: drifted.
  • A soft knee, or a voltage that creeps on the supply test: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.