Skip to content

SMD code 2K in SOD-323

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 38 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • ESD3Z18CSOD-323ESD protection diode, 2 pins, YFWESD protection diode2 pinsYFW
    What it is
    ESD protection diode
    Maker
    YFW
    Package
    SOD-323
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • HMM3Z20VT1GSOD-323Zener diode, 2 pins, HXYZener diode2 pinsHXY
    What it is
    Zener diode
    Maker
    HXY
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode, 15 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Zener diode.

  • MM3Z20SOD-323Zener diode, 2 pins, DiotecZener diode2 pinsDiotec
    What it is
    Zener diode
    Maker
    Diotec
    Package
    SOD-323
    Pins
    2
    Details
    SMD Planar Zener Diodes
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Zener diode.

  • MM3Z20VCSOD-323Zener diode, 2 pins, HXYZener diode2 pinsHXY
    What it is
    Zener diode
    Maker
    HXY
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode, 7.5 V, 0.005 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Zener diode.

  • MM3Z20VT1GSOD-323Zener diode, 2 pins, HXYZener diode2 pinsHXY
    What it is
    Zener diode
    Maker
    HXY
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode, 15 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Zener diode.

  • MM3Z20VT1GXSOD-323Zener diode, 2 pins, HXYZener diode2 pinsHXY
    What it is
    Zener diode
    Maker
    HXY
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode, 36 V, 0.01 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Zener diode.

  • PESDNC3D18VBSOD-323ESD protection diode, 2 pins, PrisemiESD protection diode2 pinsPrisemi
    What it is
    ESD protection diode
    Maker
    Prisemi
    Package
    SOD-323
    Pins
    2
    Details
    ESD protection diode, 18 V working
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • SD18CSOD-323ESD protection diode, 2 pins, UMWESD protection diode2 pinsUMW
    What it is
    ESD protection diode
    Maker
    UMW
    Package
    SOD-323
    Pins
    2
    Details
    18V, 350W, Surface Mount TVS
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • TEP18CSOD-323ESD protection diode, 2 pins, RectronESD protection diode2 pinsRectron
    What it is
    ESD protection diode
    Maker
    Rectron
    Package
    SOD-323
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • DDZ22DSSOD-323Zener diode, 2 pins, Diodes IncorporatedZener diode2 pinsDiodes Incorporated
    What it is
    Zener diode
    Maker
    Diodes Incorporated
    Package
    SOD-323
    Pins
    2
    Details
    Z-diode: 22V±10%, Izt=5mA, 200mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • DDZ22DSFSOD-323Zener diode, 2 pins, Diodes IncorporatedZener diode2 pinsDiodes Incorporated
    What it is
    Zener diode
    Maker
    Diodes Incorporated
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode: 21.52..22.63V, Izt=5mA, Zzt=55, 500mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • ESD18V32D-CSOD-323TVS diode, 2 pins, Socay ElectronicsTVS diode2 pinsSocay Electronics
    What it is
    TVS diode
    Maker
    Socay Electronics
    Package
    SOD-323
    Pins
    2
    Details
    Transient voltage supressor: Vrwm=18V, Vbr=19.0V, Ipp=8A, 320W(20us), Bidir.
    Source
    Published code list

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • MM3Z20VSOD-323Zener diode, 2 pins, EIC SemiconductorZener diode2 pinsEIC Semiconductor
    What it is
    Zener diode
    Maker
    EIC Semiconductor
    Package
    SOD-323
    Pins
    2
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • STZ8200SOD-323Zener diode, 2 pins, JinYu semiconductorZener diode2 pinsJinYu semiconductor
    What it is
    Zener diode
    Maker
    JinYu semiconductor
    Package
    SOD-323
    Pins
    2
    Details
    Zener diode: 18.8..21.2V, Izt=5mA, Zzt=80, 300mW
    Source
    Published code list

    Is it dead? The meter test is below: Zener diode.

  • 1 more part has no package on record. Nothing rules it out, so it stays.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

TVS or ESD protection diode

Diode range, from the protected line to ground, part lifted if you can.

Working, it reads

A one-way part reads about 0.6 to 0.8 V forward and open in reverse. A two-way part reads open both ways. Arrays with several lines read as the datasheet's diagram draws them.

Dead, it reads

  • From the line to ground, the same reading both ways, near 0 V with a continuous beep: shorted.
  • A reading both ways on a one-way part: leaky.
  • A one-way part open both ways: failed open.
On the board
, a line reading shorted to ground can be this part or anything else on that line. Lift it: if the short goes with it, it has failed.
Compare:
The same part on the next line or connector pin is the healthy reading to compare with.
Watch for:
A two-way part reads open both ways when it is good, exactly like one that has failed open. The meter cannot tell them apart; an identical part on the next line can.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Zener diode

Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.

Working, it reads

About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways, forward too: failed open.
  • Holds well off its rated voltage on the supply test: drifted.
  • A soft knee, or a voltage that creeps on the supply test: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as 2K

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.