SMD code 360B
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
16 parts are printed 360B
Not sure which one you have?
Answer up to 4 quick questions and these 16 parts are ranked, with a meter test that settles it. It works on a dead part too.
2 pins. What differs:
1SMC5360SMCZener diode, PanjitZener diodeSMCPanjit
- What it is
- Zener diode
- Maker
- Panjit
- Package
- SMC
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
1SMC5360-AUSMCZener diode, PanjitZener diodeSMCPanjit
- What it is
- Zener diode
- Maker
- Panjit
- Package
- SMC
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
1SMC5360BSMCZener diode, YFWZener diodeSMCYFW
- What it is
- Zener diode
- Maker
- YFW
- Package
- SMC
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
B360BSMBSchottky diode, HottechSchottky diodeSMBHottech
- What it is
- Schottky diode
- Maker
- Hottech
- Package
- SMB
- Pins
- 2
- Details
- Schottky diode, 60 V
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Schottky diode.
CZRB5360B-HFSMBZener diode, ComchipZener diodeSMBComchip
- What it is
- Zener diode
- Maker
- Comchip
- Package
- SMB
- Pins
- 2
- Details
- 25 V 5 mW zener diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
CZRC5360B-HFSMCZener diode, ComchipZener diodeSMCComchip
- What it is
- Zener diode
- Maker
- Comchip
- Package
- SMC
- Pins
- 2
- Details
- 25 V 5 mW zener diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
SMB5360BSMBZener diode, DOWOZener diodeSMBDOWO
- What it is
- Zener diode
- Maker
- DOWO
- Package
- SMB
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
SMBJ5360BSMBZener diode, Galaxy MicroelectronicsZener diodeSMBGalaxy Microelectronics
- What it is
- Zener diode
- Maker
- Galaxy Microelectronics
- Package
- SMB
- Pins
- 2
- Details
- 25V, 10%, Surface Mount Zener Diodes
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
SMC5360BSMCZener diode, DOWOZener diodeSMCDOWO
- What it is
- Zener diode
- Maker
- DOWO
- Package
- SMC
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
Z5SMC5360BSMCZener diode, Taitron ComponentsZener diodeSMCTaitron Components
- What it is
- Zener diode
- Maker
- Taitron Components
- Package
- SMC
- Pins
- 2
- Details
- SMD Zener Diodes (Two Terminals)- 5W
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
1SMB5360SMBZener diode, First SilionZener diodeSMBFirst Silion
- What it is
- Zener diode
- Maker
- First Silion
- Package
- SMB
- Pins
- 2
- Details
- Zener diode: 23.75..26.25V, Zzt=4, Izt=50.0mA, 5W
- Source
- Published code list
Is it dead? The meter test is below: Zener diode.
1SMB5360BSMBZener diode, Won-Top ElectronicsZener diodeSMBWon-Top Electronics
- What it is
- Zener diode
- Maker
- Won-Top Electronics
- Package
- SMB
- Pins
- 2
- Details
- Zener diode: 25V±5%, Izt=50mA, Zzt=4.0, 5W
- Source
- Published code list
Is it dead? The meter test is below: Zener diode.
ACZRC5360B-GSMCZener diode, ComchipZener diodeSMCComchip
- What it is
- Zener diode
- Maker
- Comchip
- Package
- SMC
- Pins
- 2
- Details
- Zener diode: 25.0V±5%, Izt=50mA, Zzt=4.0, 5W
- Source
- Published code list
Is it dead? The meter test is below: Zener diode.
CD214B-B360SMBSchottky diode, BournsSchottky diodeSMBBourns
- What it is
- Schottky diode
- Maker
- Bourns
- Package
- SMB
- Pins
- 2
- Details
- Diode: SBR, 60V, 3A, Vf<0.7V(3A), <250pF
- Source
- Published code list
Is it dead? The meter test is below: Schottky diode.
CZRC5360B-GSMCZener diode, ComchipZener diodeSMCComchip
- What it is
- Zener diode
- Maker
- Comchip
- Package
- SMC
- Pins
- 2
- Details
- Zener diode: 25.0V±5%, Zzt=4.0, Izm=190mA, 5W
- Source
- Published code list
Is it dead? The meter test is below: Zener diode.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Zener diode
Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.
Working, it reads
About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- Open both ways, forward too: failed open.
- Holds well off its rated voltage on the supply test: drifted.
- A soft knee, or a voltage that creeps on the supply test: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Schottky diode
Diode range, part lifted or one leg off the pad. Red probe on the anode.
Working, it reads
About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- A reading the wrong way round as well: leaky.
- Open both ways: failed open.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Codes that begin with 360B
For a marking with its end worn or burnt off. Each code has a page of its own.
Did you find your part?
Open this in the search to correct a character or try another package.