SMD code 3N
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
58 parts are printed 3N
Not sure which one you have?
Answer up to 4 quick questions and these 50 parts are ranked, with a meter test that settles it. It works on a dead part too.
BZD27B4V7P-MSOD-123FZener diode, 2 pins, VishayZener diodeSOD-123F2 pinsVishay
- What it is
- Zener diode
- Maker
- Vishay
- Package
- SOD-123F
- Pins
- 2
- Details
- 4.7 V Zener diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
FMBT3906TFSOT-523PNP transistor, 3 pins, Formosa MicrosemiPNP transistorSOT-5233 pinsFormosa Microsemi
- What it is
- PNP transistor
- Maker
- Formosa Microsemi
- Package
- SOT-523
- Pins
- 3
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
GSTR2060SOT-883PNP transistor, 3 pins, Good-ArkPNP transistorSOT-8833 pinsGood-Ark
- What it is
- PNP transistor
- Maker
- Good-Ark
- Package
- SOT-883
- Pins
- 3
- Details
- PNP transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
HMMBT3906WT1GSOT-323PNP transistor, 3 pins, HXYPNP transistorSOT-3233 pinsHXY
- What it is
- PNP transistor
- Maker
- HXY
- Package
- SOT-323
- Pins
- 3
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906ATSOT-523PNP transistor, 3 pins, Good-ArkPNP transistorSOT-5233 pinsGood-Ark
- What it is
- PNP transistor
- Maker
- Good-Ark
- Package
- SOT-523
- Pins
- 3
- Details
- PNP transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906FW-CSOT-523Transistor, 3 pins, SeCoSTransistorSOT-5233 pinsSeCoS
- What it is
- Transistor
- Maker
- SeCoS
- Package
- SOT-523
- Pins
- 3
- Details
- Bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor.
MMBT3906MSOT-723PNP transistor, 3 pins, JSCJPNP transistorSOT-7233 pinsJSCJ
- What it is
- PNP transistor
- Maker
- JSCJ
- Package
- SOT-723
- Pins
- 3
- Details
- 40V, 0.1A, General Purpose PNP Bipolar Transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906M-CSOT-723Transistor, 3 pins, SeCoSTransistorSOT-7233 pinsSeCoS
- What it is
- Transistor
- Maker
- SeCoS
- Package
- SOT-723
- Pins
- 3
- Details
- Bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor.
MMBT3906M-HFSOT-723PNP transistor, 3 pins, ComchipPNP transistorSOT-7233 pinsComchip
- What it is
- PNP transistor
- Maker
- Comchip
- Package
- SOT-723
- Pins
- 3
- Details
- -40 V, -0.2 A PNP transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906TSOT-523PNP transistor, 3 pins, Galaxy MicroelectronicsPNP transistorSOT-5233 pinsGalaxy Microelectronics
- What it is
- PNP transistor
- Maker
- Galaxy Microelectronics
- Package
- SOT-523
- Pins
- 3
- Details
- PNP bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906T-HFSOT-523PNP transistor, 3 pins, ComchipPNP transistorSOT-5233 pinsComchip
- What it is
- PNP transistor
- Maker
- Comchip
- Package
- SOT-523
- Pins
- 3
- Details
- -40 V, -0.2 A PNP transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
MMBT3906TT1GSOT-523PNP transistor, 3 pins, HXYPNP transistorSOT-5233 pinsHXY
- What it is
- PNP transistor
- Maker
- HXY
- Package
- SOT-523
- Pins
- 3
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
NCV8170BXV360SOT-563LDO regulator, 6 pins, onsemiLDO regulatorSOT-5636 pinsonsemi
- What it is
- LDO regulator
- Maker
- onsemi
- Package
- SOT-563
- Pins
- 6
- Details
- LDO Regulator - Ultra-Low I CMOS
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Voltage regulator.
NSVMMBT3906TT1GSOT-523PNP transistor, 3 pins, HXYPNP transistorSOT-5233 pinsHXY
- What it is
- PNP transistor
- Maker
- HXY
- Package
- SOT-523
- Pins
- 3
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: PNP transistor.
1 more part has no package on record
SGM2036S-1.1XXDH4GLDO regulator, 4 pins, SG MicroLDO regulatorNot recorded4 pinsSG Micro
- What it is
- LDO regulator
- Maker
- SG Micro
- Package
- Not recorded
- Pins
- 4
- Details
- 1.1 V output, 300mA, Low Power and Low Dropout RF Linear Regulator
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Voltage regulator.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Zener diode
Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.
Working, it reads
About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- Open both ways, forward too: failed open.
- Holds well off its rated voltage on the supply test: drifted.
- A soft knee, or a voltage that creeps on the supply test: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
PNP transistor
Diode range, part lifted or its base leg off the pad.
Working, it reads
Black probe on the base reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.
Dead, it reads
- Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
- The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
- Only one junction reads, or none: a junction has failed open. It then looks like a diode.
- A reading the wrong way round, where it should be open: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Bipolar transistor
Diode range, part lifted or its base leg off the pad.
Working, it reads
From the base, one probe colour reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.
Dead, it reads
- Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
- The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
- Only one junction reads, or none: a junction has failed open. It then looks like a diode.
- A reading the wrong way round, where it should be open: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Voltage regulator
Voltage, board powered, black probe on ground. Then ohms with the power off.
Working, it reads
Input pin at the supply, output pin at its rated voltage, and the enable pin high if it has one.
Dead, it reads
- Output equal to the input: the pass element has shorted. Everything after it may have taken the full input.
- Input present, enable high, no output: failed open, or holding itself off into a shorted load. Power off and measure output to ground.
- Power off, input to output near 0 Ω: shorted.
- On the board:
- An output at 0 V is often a shorted load with the regulator in current limit. Lift the output pin: if the short stays on the board, the regulator may be fine.
- Compare:
- The same regulator on another rail or another board shows the right voltages and the right resistances.
- Watch for:
- Makers put input, output and ground on different pins in the same package, so take them from this part's datasheet. Diode or ohms readings between its pins say little; check it powered.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Codes that begin with 3N
For a marking with its end worn or burnt off. Each code has a page of its own.
- 3N1R0C1
- 3N1R01
- 3N1R21
- 3N1R61
- 3N1R7C1
- 3N2R1C1
- 3N2R11
- 3N2R72
- 3N2R8A1
- 3N3R41
- 3N4R01
- 3N4R82
- 3N5R0A4
- 3N5R0B1
- 3N5R04
- 3N8R21
- 3N9R5A4
- 3N9R53
- 3N0181
- 3N0201
- 3NA2R41
- 3NA3R4A1
- 3NA3R41
- 3NA4R2A1
- 3NA4R21
- 3NA4R81
- 3NA5R5E1
- 3NA7R2A2
- 3NA7R22
- 3NAR68C1
- 3NB1R6C1
- 3NB1R7C1
- 3NB1R8C1
- 3NB2R1C1
- 3NB2R9C1
Codes not listed here are printed on 261 more parts.
Did you find your part?
Open this in the search to correct a character or try another package.