Skip to content

SMD code 7002

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

32 parts are printed 7002

Not sure which one you have?

Answer up to 4 quick questions and these 32 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • 2N7002SOT-23N-channel MOSFET, 3 pins, Galaxy MicroelectronicsN-channel MOSFETSOT-233 pinsGalaxy Microelectronics
    What it is
    N-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-23
    Pins
    3
    Details
    60V, N Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002-HFSOT-23N-channel MOSFET, 3 pins, ComchipN-channel MOSFETSOT-233 pinsComchip
    What it is
    N-channel MOSFET
    Maker
    Comchip
    Package
    SOT-23
    Pins
    3
    Details
    60 V, 0.25 A N-channel MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002K-HSOT-23MOSFET, 3 pins, Formosa MicrosemiMOSFETSOT-233 pinsFormosa Microsemi
    What it is
    MOSFET
    Maker
    Formosa Microsemi
    Package
    SOT-23
    Pins
    3
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • 2N7002WSOT-323N-channel MOSFET, 3 pins, Galaxy MicroelectronicsN-channel MOSFETSOT-3233 pinsGalaxy Microelectronics
    What it is
    N-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-323
    Pins
    3
    Details
    60V, N Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002W-HFSOT-323N-channel MOSFET, 3 pins, ComchipN-channel MOSFETSOT-3233 pinsComchip
    What it is
    N-channel MOSFET
    Maker
    Comchip
    Package
    SOT-323
    Pins
    3
    Details
    60 V, 0.115 A N-channel MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • BSS7002-6LSOT-23-6Dual N-channel MOSFET, 6 pins, Galaxy MicroelectronicsDual N-channel MOSFETSOT-23-66 pinsGalaxy Microelectronics
    What it is
    Dual N-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-23-6
    Pins
    6
    Details
    60V, Dual N Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET pair.

  • SMS72K-CSOT-23MOSFET, 3 pins, SeCoSMOSFETSOT-233 pinsSeCoS
    What it is
    MOSFET
    Maker
    SeCoS
    Package
    SOT-23
    Pins
    3
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • T2N7002SOT-23N-channel MOSFET, 3 pins, Galaxy MicroelectronicsN-channel MOSFETSOT-233 pinsGalaxy Microelectronics
    What it is
    N-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-23
    Pins
    3
    Details
    60V, N Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002-HXYSOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002,215SOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002K-7SOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002LT1GSOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002NXBKSOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • BS170FTASOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • BSN20BKRSOT-23N-channel MOSFET, 3 pins, HXYN-channel MOSFETSOT-233 pinsHXY
    What it is
    N-channel MOSFET
    Maker
    HXY
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

N-channel MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

Red probe on the source, black on the drain: about 0.4 to 0.9 V, the body diode. Open the other way. The gate reads open to both other pins, both ways.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted. Often all three pins end up shorted together.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, so gate to source reads that resistor, which is not a fault. A drain short can be the load. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

One way between drain and source reads about 0.4 to 0.9 V, the body diode, and the other way open. The gate reads open to both other pins.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, which reads as that resistor and is not a fault. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

N-channel MOSFET pair

Diode range, part lifted. Test drain to source first, then short gate to source and test again. Test each MOSFET on its own pins, as the datasheet's pinout gives them.

Working, it reads

Red probe on the source, black on the drain: about 0.4 to 0.9 V, the body diode. Open the other way. The gate reads open to both other pins, both ways.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted. Often all three pins end up shorted together.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, so gate to source reads that resistor, which is not a fault. A drain short can be the load. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Codes that begin with 7002

For a marking with its end worn or burnt off. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.