Skip to content

SMD code 702 in SOT-23

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

15 parts in SOT-23 are printed 702

Not sure which one you have?

Answer up to 4 quick questions and these 15 parts are ranked, with a meter test that settles it. It works on a dead part too.

all SOT-23, 3 pins. What differs:

  • 2N7002SOT-23N-channel MOSFET, onsemiN-channel MOSFETonsemi
    What it is
    N-channel MOSFET
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Details
    60V, N Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002ASOT-23N-channel MOSFET, DiotecN-channel MOSFETDiotec
    What it is
    N-channel MOSFET
    Maker
    Diotec
    Package
    SOT-23
    Pins
    3
    Details
    MOSFET, N-channel, 60 V, 0.45 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002K-HFSOT-23N-channel MOSFET, ComchipN-channel MOSFETComchip
    What it is
    N-channel MOSFET
    Maker
    Comchip
    Package
    SOT-23
    Pins
    3
    Details
    60 V, 0.115 A N-channel MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • S2N7002-CSOT-23MOSFET, SeCoSMOSFETSeCoS
    What it is
    MOSFET
    Maker
    SeCoS
    Package
    SOT-23
    Pins
    3
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • WM06N03MESOT-23WayonNot recordedWayon
    What it is
    Not recorded
    Maker
    Wayon
    Package
    SOT-23
    Pins
    3
    Details
    MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: MOSFET.

  • MTNK6N3SOT-23N-channel MOSFET, CYStekN-channel MOSFETCYStek
    What it is
    N-channel MOSFET
    Maker
    CYStek
    Package
    SOT-23
    Pins
    3
    Details
    60 V, 0.43 A N-channel MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002-GSOT-23N-channel MOSFET, SupertexN-channel MOSFETSupertex
    What it is
    N-channel MOSFET
    Maker
    Supertex
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002LSOT-23N-channel MOSFET, onsemiN-channel MOSFETonsemi
    What it is
    N-channel MOSFET
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Details
    N-Channel Enhancement Mode Field Effect Transistor 2N7002L
    Source
    An older or alternative marking, from a published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002LT1GSOT-23N-channel MOSFET, onsemiN-channel MOSFETonsemi
    What it is
    N-channel MOSFET
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Details
    N-channel MOSFET, 60 V, 0.3 A
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2N7002MTFSOT-23N-channel MOSFET, Fairchild SemiconductorN-channel MOSFETFairchild Semiconductor
    What it is
    N-channel MOSFET
    Maker
    Fairchild Semiconductor
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • 2V7002LSOT-23N-channel MOSFET, onsemiN-channel MOSFETonsemi
    What it is
    N-channel MOSFET
    Maker
    onsemi
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • L2N7002LT1GSOT-23N-channel MOSFET, LRCN-channel MOSFETLRC
    What it is
    N-channel MOSFET
    Maker
    LRC
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • MTN138ZN3SOT-23N-channel MOSFETN-channel MOSFETNot recorded
    What it is
    N-channel MOSFET
    Maker
    Not recorded
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • MTN7002N3SOT-23N-channel MOSFETN-channel MOSFETNot recorded
    What it is
    N-channel MOSFET
    Maker
    Not recorded
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

  • MTN7002ZHN3SOT-23N-channel MOSFETN-channel MOSFETNot recorded
    What it is
    N-channel MOSFET
    Maker
    Not recorded
    Package
    SOT-23
    Pins
    3
    Source
    Published code list

    Is it dead? The meter test is below: N-channel MOSFET.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

N-channel MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

Red probe on the source, black on the drain: about 0.4 to 0.9 V, the body diode. Open the other way. The gate reads open to both other pins, both ways.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted. Often all three pins end up shorted together.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, so gate to source reads that resistor, which is not a fault. A drain short can be the load. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

One way between drain and source reads about 0.4 to 0.9 V, the body diode, and the other way open. The gate reads open to both other pins.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, which reads as that resistor and is not a fault. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as 702

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Codes that begin with 702

For a marking with its end worn or burnt off. Each code has a page of its own.

Codes not listed here are printed on 1 more part.

Did you find your part?

Open this in the search to correct a character or try another package.