Skip to content

SMD code A3 in SOD-123F

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 50 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • 1N4003SOD-123FRectifier, 2 pins, UMWRectifier2 pinsUMW
    What it is
    Rectifier
    Maker
    UMW
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • 1N4003WSOD-123FRectifier, 2 pins, Blue RocketRectifier2 pinsBlue Rocket
    What it is
    Rectifier
    Maker
    Blue Rocket
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • ACGRTS4003-HFSOD-123FRectifier, 2 pins, ComchipRectifier2 pinsComchip
    What it is
    Rectifier
    Maker
    Comchip
    Package
    SOD-123F
    Pins
    2
    Details
    200 V, 1 A rectifier
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • CGRTS4003-HFSOD-123FRectifier, 2 pins, ComchipRectifier2 pinsComchip
    What it is
    Rectifier
    Maker
    Comchip
    Package
    SOD-123F
    Pins
    2
    Details
    200 V, 1 A rectifier
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • DSR1DSOD-123FRectifier, 2 pins, YFWRectifier2 pinsYFW
    What it is
    Rectifier
    Maker
    YFW
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • GSA3SOD-123FRectifier, 2 pins, Good-ArkRectifier2 pinsGood-Ark
    What it is
    Rectifier
    Maker
    Good-Ark
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier, 200 V, 1 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • PMEG2005EHSOD-123FSchottky diode, 2 pins, NexperiaSchottky diode2 pinsNexperia
    What it is
    Schottky diode
    Maker
    Nexperia
    Package
    SOD-123F
    Pins
    2
    Details
    20 V, 0.5 A very low VF MEGA Schottky barrier rectifier
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • PTVS6V0S1UR-MSSOD-123FTVS diode, 2 pins, MSKSEMITVS diode2 pinsMSKSEMI
    What it is
    TVS diode
    Maker
    MSKSEMI
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • S-SOD4003-SHSOD-123FRectifier, 2 pins, LRCRectifier2 pinsLRC
    What it is
    Rectifier
    Maker
    LRC
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier, VPK 200 V, IO @ TL 1 A, TL@°C 75
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SM4003FL-CSOD-123FRectifier, 2 pins, SeCoSRectifier2 pinsSeCoS
    What it is
    Rectifier
    Maker
    SeCoS
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SM4003FLCR-CSOD-123FRectifier, 2 pins, SeCoSRectifier2 pinsSeCoS
    What it is
    Rectifier
    Maker
    SeCoS
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SM4003PLSOD-123FRectifier, 2 pins, YFWRectifier2 pinsYFW
    What it is
    Rectifier
    Maker
    YFW
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SOD4003-SHSOD-123FRectifier, 2 pins, LRCRectifier2 pinsLRC
    What it is
    Rectifier
    Maker
    LRC
    Package
    SOD-123F
    Pins
    2
    Details
    Rectifier, VPK 200 V, IO @ TL 1 A, TL@°C 75
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • NVS4M6.5ASOD-123FTVS diode, 2 pins, FutureWafer TechTVS diode2 pinsFutureWafer Tech
    What it is
    TVS diode
    Maker
    FutureWafer Tech
    Package
    SOD-123F
    Pins
    2
    Details
    Transient voltage supressor: Vrwm=6.5V, Vbr=7.13..7.88V, Ipp=37.5A, 400W(1ms)
    Source
    Published code list

    Is it dead? The meter test is below: TVS or ESD protection diode.

  • 1 more part has no package on record. Nothing rules it out, so it stays.
    • BAW56-181Switching diode, Taitron ComponentsSwitching diodeNot recordedTaitron Components
      What it is
      Switching diode
      Maker
      Taitron Components
      Package
      Not recorded
      Pins
      Not recorded
      Details
      SMD Switching Diodes (Three Terminals)
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Schottky diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • A reading the wrong way round as well: leaky.
  • Open both ways: failed open.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

TVS or ESD protection diode

Diode range, from the protected line to ground, part lifted if you can.

Working, it reads

A one-way part reads about 0.6 to 0.8 V forward and open in reverse. A two-way part reads open both ways. Arrays with several lines read as the datasheet's diagram draws them.

Dead, it reads

  • From the line to ground, the same reading both ways, near 0 V with a continuous beep: shorted.
  • A reading both ways on a one-way part: leaky.
  • A one-way part open both ways: failed open.
On the board
, a line reading shorted to ground can be this part or anything else on that line. Lift it: if the short goes with it, it has failed.
Compare:
The same part on the next line or connector pin is the healthy reading to compare with.
Watch for:
A two-way part reads open both ways when it is good, exactly like one that has failed open. The meter cannot tell them apart; an identical part on the next line can.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Codes that begin with A3

For a marking with its end worn or burnt off. Each code has a page of its own.

Codes not listed here are printed on 88 more parts.

Did you find your part?

Open this in the search to correct a character or try another package.