Skip to content
WhatSMDSign in

SMD code ABO in SOT-353

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

1 part in SOT-353 is printed ABO

Not sure which one you have?

Answer up to 4 quick questions and these 3 parts are ranked, with a meter test that settles it. It works on a dead part too.

all Analog Devices. What differs:

  • MAX6605XKSOT-3535 pins5 pins
    What it is
    Not recorded
    Maker
    Analog Devices
    Package
    SOT-353
    Pins
    5
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • 2 more parts have no package on record. Nothing rules them out, so they stay.
    • MAX1077XTB10 pins10 pins
      What it is
      Not recorded
      Maker
      Analog Devices
      Package
      Not recorded
      Pins
      10
      Source
      Published code list

      Is it dead? The meter test is below: This part.

    • MAX6401BS244 pins4 pins
      What it is
      Not recorded
      Maker
      Analog Devices
      Package
      Not recorded
      Pins
      4
      Source
      Published code list

      Is it dead? The meter test is below: This part.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as ABO

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Codes that begin with ABO

For a marking with its end worn or burnt off. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.