Skip to content

SMD code F

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 50 parts are ranked, with a meter test that settles it. It works on a dead part too.

all onsemi. What differs:

  • NL17SZ125P5SOT-953Logic gate, 5 pinsLogic gateSOT-9535 pins
    What it is
    Logic gate
    Maker
    onsemi
    Package
    SOT-953
    Pins
    5
    Details
    Non Inverting 3 State Buffer
    Source
    An older or alternative marking, from a published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NL27WZ08MU3DFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: Dual 2-input AND gate
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLU1G00CMUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: 2-input NAND gate
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLU1G04AMUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: Single inverter
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLU1G32CMUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: 2-input OR gate
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLU2G06MUTCGDFN6 pinsNot recordedDFN6 pins
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    6
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • NLX2G14MUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: Dual inverter with Schmitt-trigger inputs
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLX2G16AMUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: Dual noniverting buffers
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NLX3G14EMUDFNNot recordedDFNNot recorded
    What it is
    Not recorded
    Maker
    onsemi
    Package
    DFN
    Pins
    Not recorded
    Details
    CMOS logic IC: Triple inverting buffer with Schmitt-trigger inputs
    Source
    Published code list

    Is it dead? The meter test is below: Integrated circuit.

  • NSBA114EF3TSOT-1123Digital transistor (PNP, resistors built in), 3 pinsDigital transistor (PNP, resistors built in)SOT-11233 pins
    What it is
    Digital transistor (PNP, resistors built in)
    Maker
    onsemi
    Package
    SOT-1123
    Pins
    3
    Details
    PNP transistor: Sw, 50V, 100mA, 200mW, R1/R2=10k/10k
    Source
    Published code list

    Is it dead? The meter test is below: Digital transistor.

  • NSBA123TF3TSOT-1123Digital transistor (PNP, resistors built in), 3 pinsDigital transistor (PNP, resistors built in)SOT-11233 pins
    What it is
    Digital transistor (PNP, resistors built in)
    Maker
    onsemi
    Package
    SOT-1123
    Pins
    3
    Details
    PNP transistor: Sw, 50V, 100mA, 200mW, R1=2.2k
    Source
    Published code list

    Is it dead? The meter test is below: Digital transistor.

  • NST3906DP6T5GSOT-9636 pinsNot recordedSOT-9636 pins
    What it is
    Not recorded
    Maker
    onsemi
    Package
    SOT-963
    Pins
    6
    Source
    Published code list

    Is it dead? The meter test is below: This part.

  • 3 more parts have no package on record
    • NLX1G97AMXNot recordedNot recordedNot recorded
      What it is
      Not recorded
      Maker
      onsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS logic IC: Configurable multiple-function gate
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • NLX1G97BMXNot recordedNot recordedNot recorded
      What it is
      Not recorded
      Maker
      onsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS logic IC: Configurable multiple-function gate
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • NLX1G97CMXNot recordedNot recordedNot recorded
      What it is
      Not recorded
      Maker
      onsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS logic IC: Configurable multiple-function gate
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Integrated circuit

Voltage with the board powered; ohms from each pin to ground with it off.

Working, it reads

Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.

Dead, it reads

  • A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
  • Supply present, output stuck: failed, or its load has.
On the board:
A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
Compare:
The surest reference is the same IC on a working board, measured pin by pin.
Watch for:
Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Digital transistor

Ohms range, part lifted. The datasheet gives the built-in resistors: R1 in series with the base, R2 from base to emitter.

Working, it reads

Base to emitter reads about R1 plus R2 either way round, about 20 kΩ on a 10 k and 10 k part, give or take their wide tolerance. Collector to emitter reads open. A part with no R2 reads a junction behind R1 one way instead.

Dead, it reads

  • Collector to emitter the same both ways, near 0 Ω with a continuous beep: shorted.
  • From the base, open or far above R1 plus R2: R1 has failed. Static damage shows here most often.
  • Base to emitter near 0 Ω: failed short.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
The readings depend on the resistor values, so an identical part elsewhere on the board is the surest reference. Measure it the same way.
Watch for:
On the diode range a good part with 10 kΩ resistors reads open on every pair, so a good part looks dead there. Use the ohms range.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Did you find your part?

Open this in the search to correct a character or try another package.