Skip to content

SMD code H11

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

21 parts are printed H11

Not sure which one you have?

Answer up to 4 quick questions and these 21 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • AEMH11-HFSOT-563Dual NPN transistor, 6 pins, ComchipDual NPN transistorSOT-5636 pinsComchip
    What it is
    Dual NPN transistor
    Maker
    Comchip
    Package
    SOT-563
    Pins
    6
    Details
    NPN+NPN digital transistor, R1 10 kΩ, R2 10 kΩ
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: NPN transistor pair.

  • AUMH11N-HFSOT-363Dual NPN transistor, 6 pins, ComchipDual NPN transistorSOT-3636 pinsComchip
    What it is
    Dual NPN transistor
    Maker
    Comchip
    Package
    SOT-363
    Pins
    6
    Details
    NPN+NPN digital transistor, R1 10 kΩ, R2 10 kΩ
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: NPN transistor pair.

  • CHEMH11GPSOT-563Digital transistor (NPN, resistors built in), 6 pins, ChenmkoDigital transistor (NPN, resistors built in)SOT-5636 pinsChenmko
    What it is
    Digital transistor (NPN, resistors built in)
    Maker
    Chenmko
    Package
    SOT-563
    Pins
    6
    Details
    Dual Digital Silicon Transistor, 50 V, 50 mA
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • EMH11SOT-563Digital transistor (NPN, resistors built in), 6 pins, Galaxy MicroelectronicsDigital transistor (NPN, resistors built in)SOT-5636 pinsGalaxy Microelectronics
    What it is
    Digital transistor (NPN, resistors built in)
    Maker
    Galaxy Microelectronics
    Package
    SOT-563
    Pins
    6
    Details
    50V, 50mA, NPN Bipolar Digital Transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • EMH11CR-CSOT-563Digital transistor (resistors built in), 6 pins, SeCoSDigital transistor (resistors built in)SOT-5636 pinsSeCoS
    What it is
    Digital transistor (resistors built in)
    Maker
    SeCoS
    Package
    SOT-563
    Pins
    6
    Details
    Digital (resistor-equipped) transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • HFM101SMARectifier, 2 pins, Formosa MicrosemiRectifierSMA2 pinsFormosa Microsemi
    What it is
    Rectifier
    Maker
    Formosa Microsemi
    Package
    SMA
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • HFM101-Q1SMARectifier, 2 pins, Formosa MicrosemiRectifierSMA2 pinsFormosa Microsemi
    What it is
    Rectifier
    Maker
    Formosa Microsemi
    Package
    SMA
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • IMH11ASOT-23-6Digital transistor (resistors built in), 6 pins, ROHMDigital transistor (resistors built in)SOT-23-66 pinsROHM
    What it is
    Digital transistor (resistors built in)
    Maker
    ROHM
    Package
    SOT-23-6
    Pins
    6
    Details
    General purpose (dual digital transistors)
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • TEMH11SOT-563Digital transistor (resistors built in), 6 pins, Galaxy MicroelectronicsDigital transistor (resistors built in)SOT-5636 pinsGalaxy Microelectronics
    What it is
    Digital transistor (resistors built in)
    Maker
    Galaxy Microelectronics
    Package
    SOT-563
    Pins
    6
    Details
    50V, 50mA, NPN Bipolar Digital Transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • TUMH11NSOT-363Digital transistor (NPN, resistors built in), 6 pins, Galaxy MicroelectronicsDigital transistor (NPN, resistors built in)SOT-3636 pinsGalaxy Microelectronics
    What it is
    Digital transistor (NPN, resistors built in)
    Maker
    Galaxy Microelectronics
    Package
    SOT-363
    Pins
    6
    Details
    50V, 50mA, NPN Bipolar Digital Transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • UMH11NSOT-363Digital transistor (NPN, resistors built in), 6 pins, Galaxy MicroelectronicsDigital transistor (NPN, resistors built in)SOT-3636 pinsGalaxy Microelectronics
    What it is
    Digital transistor (NPN, resistors built in)
    Maker
    Galaxy Microelectronics
    Package
    SOT-363
    Pins
    6
    Details
    50V, 50mA, NPN Bipolar Digital Transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • UMH11N-CSOT-363Digital transistor (resistors built in), 6 pins, SeCoSDigital transistor (resistors built in)SOT-3636 pinsSeCoS
    What it is
    Digital transistor (resistors built in)
    Maker
    SeCoS
    Package
    SOT-363
    Pins
    6
    Details
    Digital (resistor-equipped) transistor
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Digital transistor.

  • 3 more parts have no package on record
    • HFM101-LRectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • HFM101-SFRectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • HFM101-SF-Q1Rectifier, Formosa MicrosemiRectifierNot recordedNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

NPN transistor pair

Diode range, part lifted. Test each transistor on its own pins, as the datasheet's pinout gives them.

Working, it reads

Red probe on the base reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.

Dead, it reads

  • Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
  • The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
  • Only one junction reads, or none: a junction has failed open. It then looks like a diode.
  • A reading the wrong way round, where it should be open: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Digital transistor

Ohms range, part lifted. The datasheet gives the built-in resistors: R1 in series with the base, R2 from base to emitter.

Working, it reads

Base to emitter reads about R1 plus R2 either way round, about 20 kΩ on a 10 k and 10 k part, give or take their wide tolerance. Collector to emitter reads open. A part with no R2 reads a junction behind R1 one way instead.

Dead, it reads

  • Collector to emitter the same both ways, near 0 Ω with a continuous beep: shorted.
  • From the base, open or far above R1 plus R2: R1 has failed. Static damage shows here most often.
  • Base to emitter near 0 Ω: failed short.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
The readings depend on the resistor values, so an identical part elsewhere on the board is the surest reference. Measure it the same way.
Watch for:
On the diode range a good part with 10 kΩ resistors reads open on every pair, so a good part looks dead there. Use the ohms range.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Digital transistor

Ohms range, part lifted. The datasheet gives the built-in resistors: R1 in series with the base, R2 from base to emitter.

Working, it reads

Base to emitter reads about R1 plus R2 either way round, about 20 kΩ on a 10 k and 10 k part, give or take their wide tolerance. Collector to emitter reads open. A part with no R2 reads a junction behind R1 one way instead.

Dead, it reads

  • Collector to emitter the same both ways, near 0 Ω with a continuous beep: shorted.
  • From the base, open or far above R1 plus R2: R1 has failed. Static damage shows here most often.
  • Base to emitter near 0 Ω: failed short.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
The readings depend on the resistor values, so an identical part elsewhere on the board is the surest reference. Measure it the same way.
Watch for:
On the diode range a good part with 10 kΩ resistors reads open on every pair, so a good part looks dead there. Use the ohms range.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as H11

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Codes that begin with H11

For a marking with its end worn or burnt off. Each code has a page of its own.

Codes not listed here are printed on 23 more parts.

Did you find your part?

Open this in the search to correct a character or try another package.