SMD code M0D
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
10 parts are printed M0D
Not sure which one you have?
Answer up to 4 quick questions and these 10 parts are ranked, with a meter test that settles it. It works on a dead part too.
Voltage supervisor. What differs:
ADM6711TAKSSOT-3434 pins, Analog DevicesSOT-3434 pinsAnalog Devices
- What it is
- Voltage supervisor
- Maker
- Analog Devices
- Package
- SOT-343
- Pins
- 4
- Details
- Voltage detector IC: 3.08V±1%, -Reset PPO, -MR
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
IXD5108N20DMRSOT-23-55 pins, IXYSSOT-23-55 pinsIXYS
- What it is
- Voltage supervisor
- Maker
- IXYS
- Package
- SOT-23-5
- Pins
- 5
- Details
- Voltage detector IC: 2.0V±2%, -Reset ODO
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
IXD5118C10DMR-GSOT-23-55 pins, IXYSSOT-23-55 pinsIXYS
- What it is
- Voltage supervisor
- Maker
- IXYS
- Package
- SOT-23-5
- Pins
- 5
- Details
- Voltage detector IC: 1.0V±30mV, ±Reset PPO, Sense, Hst <1%
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
R3117N101ASOT-23-55 pins, RicohSOT-23-55 pinsRicoh
- What it is
- Voltage supervisor
- Maker
- Ricoh
- Package
- SOT-23-5
- Pins
- 5
- Details
- Voltage detector IC: 1.0V±15mV, -Reset ODO, Sense
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC6108N20DMRSOT-23-55 pins, TorexSOT-23-55 pinsTorex
- What it is
- Voltage supervisor
- Maker
- Torex
- Package
- SOT-23-5
- Pins
- 5
- Details
- CMOS-IC: Voltage Detector 2,0V, -Reset Open drain output
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC6118C10DMR-GSOT-23-55 pins, TorexSOT-23-55 pinsTorex
- What it is
- Voltage supervisor
- Maker
- Torex
- Package
- SOT-23-5
- Pins
- 5
- Details
- Voltage detector IC: 1.0V±30mV, ±Reset PPO, Sense, Hst <1%
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
4 more parts have no package on record
IXD5108N20DGRIXYSNot recordedNot recordedIXYS
- What it is
- Voltage supervisor
- Maker
- IXYS
- Package
- Not recorded
- Pins
- Not recorded
- Details
- Voltage detector IC: 2.0V±2%, -Reset ODO
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
IXD5118C10DGR-GIXYSNot recordedNot recordedIXYS
- What it is
- Voltage supervisor
- Maker
- IXYS
- Package
- Not recorded
- Pins
- Not recorded
- Details
- Voltage detector IC: 1.0V±30mV, ±Reset PPO, Sense, Hst. <1%
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC6108N20DGRTorexNot recordedNot recordedTorex
- What it is
- Voltage supervisor
- Maker
- Torex
- Package
- Not recorded
- Pins
- Not recorded
- Details
- CMOS-IC: Voltage Detector 2,0V, -Reset Open drain output
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC6118C10DGR-GTorexNot recordedNot recordedTorex
- What it is
- Voltage supervisor
- Maker
- Torex
- Package
- Not recorded
- Pins
- Not recorded
- Details
- Voltage detector IC: 1.0V±30mV, ±Reset PPO, Sense, Hst. <1%
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Integrated circuit
Voltage with the board powered; ohms from each pin to ground with it off.
Working, it reads
Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.
Dead, it reads
- A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
- Supply present, output stuck: failed, or its load has.
- On the board:
- A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
- Compare:
- The surest reference is the same IC on a working board, measured pin by pin.
- Watch for:
- Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Printed with a code easy to misread as M0D
One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.
Codes that begin with M0D
For a marking with its end worn or burnt off. Each code has a page of its own.
Codes not listed here are printed on 1 more part.
Did you find your part?
Open this in the search to correct a character or try another package.