SMD code R6E
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
10 parts are printed R6E
Not sure which one you have?
Answer up to 4 quick questions and these 10 parts are ranked, with a meter test that settles it. It works on a dead part too.
LM4040QEIM3-2.5SOT-23Voltage reference, 3 pins, Texas InstrumentsVoltage referenceSOT-233 pinsTexas Instruments
- What it is
- Voltage reference
- Maker
- Texas Instruments
- Package
- SOT-23
- Pins
- 3
- Details
- LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
LM4040QEIM3X2.5SOT-23Voltage reference, 3 pins, Texas InstrumentsVoltage referenceSOT-233 pinsTexas Instruments
- What it is
- Voltage reference
- Maker
- Texas Instruments
- Package
- SOT-23
- Pins
- 3
- Details
- LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
SGM836-1.5XN6GSOT-23-6Voltage supervisor, 6 pins, SG MicroVoltage supervisorSOT-23-66 pinsSG Micro
- What it is
- Voltage supervisor
- Maker
- SG Micro
- Package
- SOT-23-6
- Pins
- 6
- Details
- 1.40 V threshold, Microprocessor Supervisory Circuit with Programmable Delay Time
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
XC6368F643MRSOT-23-5DC-DC converter, 5 pins, TorexDC-DC converterSOT-23-55 pinsTorex
- What it is
- DC-DC converter
- Maker
- Torex
- Package
- SOT-23-5
- Pins
- 5
- Details
- DC/DC voltage converter IC: PWM/PFM st-up, 6.4V±2.5%, 200mA, 300kHz, +CE, soft start
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC9147D32DER-GUSP-6CDC-DC converter, 6 pins, TorexDC-DC converterUSP-6C6 pinsTorex
- What it is
- DC-DC converter
- Maker
- Torex
- Package
- USP-6C
- Pins
- 6
- Details
- DC/DC voltage converter IC: PWM st-up, 3.0MHz, 3.2V±2%, 1.4A, CrLL, ShPr, CL, +CE
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
XC9147D32DPR-GSOT-89-5DC-DC converter, 5 pins, TorexDC-DC converterSOT-89-55 pinsTorex
- What it is
- DC-DC converter
- Maker
- Torex
- Package
- SOT-89-5
- Pins
- 5
- Details
- DC/DC voltage converter IC: PWM step-up, 3.0MHz, 3.2V±2%, 1.4A, CrLL, ShPr, CL, +CE
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
4 more parts have no package on record
S-8211CDF-I6T1UBattery protection IC, ABLICBattery protection ICNot recordedNot recordedABLIC
- What it is
- Battery protection IC
- Maker
- ABLIC
- Package
- Not recorded
- Pins
- Not recorded
- Details
- BATTERY PROTECTION IC FOR 1-CELL PACK
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
TPR6040F33-S3TRVoltage reference, 3 pins, 3PEAKVoltage referenceNot recorded3 pins3PEAK
- What it is
- Voltage reference
- Maker
- 3PEAK
- Package
- Not recorded
- Pins
- 3
- Details
- High-Precision Shunt Voltage Reference
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
TPR6040F33-S3TR-SVoltage reference, 3 pins, 3PEAKVoltage referenceNot recorded3 pins3PEAK
- What it is
- Voltage reference
- Maker
- 3PEAK
- Package
- Not recorded
- Pins
- 3
- Details
- High-Precision Shunt Voltage Reference
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Integrated circuit.
S-8211CDE-I6T16 pins, ABLICNot recordedNot recorded6 pinsABLIC
- What it is
- Not recorded
- Maker
- ABLIC
- Package
- Not recorded
- Pins
- 6
- Source
- Published code list
Is it dead? The meter test is below: This part.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Integrated circuit
Voltage with the board powered; ohms from each pin to ground with it off.
Working, it reads
Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.
Dead, it reads
- A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
- Supply present, output stuck: failed, or its load has.
- On the board:
- A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
- Compare:
- The surest reference is the same IC on a working board, measured pin by pin.
- Watch for:
- Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
This part
Diode range and ohms range, part lifted.
Working, it reads
Depends on what it is. The datasheet, or an identical part, says.
Dead, it reads
- Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
- Open between every pair of pins: failed open, or a part that reads open when working.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Printed with a code easy to misread as R6E
One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.
Codes that begin with R6E
For a marking with its end worn or burnt off. Each code has a page of its own.
Did you find your part?
Open this in the search to correct a character or try another package.