Skip to content

SMD code S7 in SOD-123

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 24 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • BAT42WSOD-123Schottky diode, 2 pins, AiT SemiconductorSchottky diode2 pinsAiT Semiconductor
    What it is
    Schottky diode
    Maker
    AiT Semiconductor
    Package
    SOD-123
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • BAT42W-CSOD-123Schottky diode, 2 pins, SeCoSSchottky diode2 pinsSeCoS
    What it is
    Schottky diode
    Maker
    SeCoS
    Package
    SOD-123
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • BAT42W-E3-08SOD-123Switching diode, 2 pins, HXYSwitching diode2 pinsHXY
    What it is
    Switching diode
    Maker
    HXY
    Package
    SOD-123
    Pins
    2
    Details
    Switching diode, 30 V, 0.2 A
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • BAT42W-P2-HFSOD-123Schottky diode, 2 pins, ComchipSchottky diode2 pinsComchip
    What it is
    Schottky diode
    Maker
    Comchip
    Package
    SOD-123
    Pins
    2
    Details
    30 V, 200 A Schottky barrier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • GSBAT42WSOD-123Schottky diode, 2 pins, Good-ArkSchottky diode2 pinsGood-Ark
    What it is
    Schottky diode
    Maker
    Good-Ark
    Package
    SOD-123
    Pins
    2
    Details
    Schottky diode, 30 V, 200 mA
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • LMBR140T1GSOD-123Schottky diode, 2 pins, LRCSchottky diode2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SOD-123
    Pins
    2
    Details
    Schottky diode, VR 40 V, IF 1 A, VF Max 0.56 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • S-LMBR140T1GSOD-123Schottky diode, 2 pins, LRCSchottky diode2 pinsLRC
    What it is
    Schottky diode
    Maker
    LRC
    Package
    SOD-123
    Pins
    2
    Details
    Schottky diode, VR 40 V, IF 1 A, VF Max 0.56 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SD103BWSOD-123Schottky diode, 2 pins, Taitron ComponentsSchottky diode2 pinsTaitron Components
    What it is
    Schottky diode
    Maker
    Taitron Components
    Package
    SOD-123
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • SFM17-MSOD-123Rectifier, 2 pins, Formosa MicrosemiRectifier2 pinsFormosa Microsemi
    What it is
    Rectifier
    Maker
    Formosa Microsemi
    Package
    SOD-123
    Pins
    2
    Details
    Rectifier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • TBAT42WSOD-123Schottky diode, 2 pins, Galaxy MicroelectronicsSchottky diode2 pinsGalaxy Microelectronics
    What it is
    Schottky diode
    Maker
    Galaxy Microelectronics
    Package
    SOD-123
    Pins
    2
    Details
    0.2A, 30V, Surface Mount Small Signal Schottky Diodes
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • WSR3002D1SOD-123Schottky diode, 2 pins, WayonSchottky diode2 pinsWayon
    What it is
    Schottky diode
    Maker
    Wayon
    Package
    SOD-123
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • 4 more parts have no package on record. Nothing rules them out, so they stay.
    • SFM17-MHRectifier, Formosa MicrosemiRectifierNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM17-MSRectifier, Formosa MicrosemiRectifierNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • SFM17-MS-Q1Rectifier, Formosa MicrosemiRectifierNot recordedFormosa Microsemi
      What it is
      Rectifier
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Rectifier diode
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • TPS22915CYFPLoad switch, 4 pins, Texas InstrumentsLoad switch4 pinsTexas Instruments
      What it is
      Load switch
      Maker
      Texas Instruments
      Package
      Not recorded
      Pins
      4
      Details
      5.5V, 2A, 37mΩ On-Resistance Load Switch
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Load switch.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Schottky diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • A reading the wrong way round as well: leaky.
  • Open both ways: failed open.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Load switch

Voltage, board powered, black probe on ground.

Working, it reads

Switched on, the output pin sits at the input voltage. Switched off, it sits near 0 V.

Dead, it reads

  • Output at the input voltage while switched off: the pass element has shorted.
  • Input present and switched on, no output: failed open, or shut down into a shorted load. Power off and measure output to ground.
On the board:
An output near 0 Ω to ground is usually the load. Lift the output pin to see which.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The pinout and whether the enable is active high or low differ between parts. The datasheet gives both.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as S7

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.