SMD code T3 in SOD-123
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
16 parts in SOD-123 are printed T3
Not sure which one you have?
Answer up to 4 quick questions and these 40 parts are ranked, with a meter test that settles it. It works on a dead part too.
all SOD-123, 2 pins. What differs:
ABAV21W-HFSOD-123Switching diode, ComchipSwitching diodeComchip
- What it is
- Switching diode
- Maker
- Comchip
- Package
- SOD-123
- Pins
- 2
- Details
- 250 V, 200 mA switching diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
ACDSW21-HFSOD-123Switching diode, ComchipSwitching diodeComchip
- What it is
- Switching diode
- Maker
- Comchip
- Package
- SOD-123
- Pins
- 2
- Details
- 200 V, 200 mA switching diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21P-CSOD-123Switching diode, SeCoSSwitching diodeSeCoS
- What it is
- Switching diode
- Maker
- SeCoS
- Package
- SOD-123
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21WSOD-123Switching diode, Galaxy MicroelectronicsSwitching diodeGalaxy Microelectronics
- What it is
- Switching diode
- Maker
- Galaxy Microelectronics
- Package
- SOD-123
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21W-GSOD-123Switching diode, Taiwan SemiconductorSwitching diodeTaiwan Semiconductor
- What it is
- Switching diode
- Maker
- Taiwan Semiconductor
- Package
- SOD-123
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21W-G3-08SOD-123Switching diode, HXYSwitching diodeHXY
- What it is
- Switching diode
- Maker
- HXY
- Package
- SOD-123
- Pins
- 2
- Details
- Switching diode, 250 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21W-HFSOD-123Switching diode, ComchipSwitching diodeComchip
- What it is
- Switching diode
- Maker
- Comchip
- Package
- SOD-123
- Pins
- 2
- Details
- 200 V, 200 mA switching diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAV21WHSOD-123Switching diode, Taiwan SemiconductorSwitching diodeTaiwan Semiconductor
- What it is
- Switching diode
- Maker
- Taiwan Semiconductor
- Package
- SOD-123
- Pins
- 2
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
MMSZ3V0SOD-123Zener diode, onsemiZener diodeonsemi
- What it is
- Zener diode
- Maker
- onsemi
- Package
- SOD-123
- Pins
- 2
- Details
- Zener Voltage Regulators MMSZxxxT1G Series, SZMMSZxxxT1G Series
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Zener diode.
TBAV21WSOD-123Switching diode, Galaxy MicroelectronicsSwitching diodeGalaxy Microelectronics
- What it is
- Switching diode
- Maker
- Galaxy Microelectronics
- Package
- SOD-123
- Pins
- 2
- Details
- 0.2A, 200V, Surface Mount Small Signal Switching Diodes
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
BAS21SHSOD-123Switching diode, CYStekSwitching diodeCYStek
- What it is
- Switching diode
- Maker
- CYStek
- Package
- SOD-123
- Pins
- 2
- Details
- 250 V switching diode
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Silicon diode.
1SV186SOD-123ToshibaNot recordedToshiba
- What it is
- Not recorded
- Maker
- Toshiba
- Package
- SOD-123
- Pins
- 2
- Details
- C-diode: UHF/SHF-Tuning, 3,3..4,5pF(2V)
- Source
- Published code list
Is it dead? The meter test is below: Silicon diode.
1SV245SOD-123ToshibaNot recordedToshiba
- What it is
- Not recorded
- Maker
- Toshiba
- Package
- SOD-123
- Pins
- 2
- Details
- C-diode: UHF/SHF-Tun, 35V, 0,61..0,77pF(25V), Rs<2Ω(470MHz)
- Source
- Published code list
Is it dead? The meter test is below: Silicon diode.
BAV19WSOD-123Switching diode, Diodes IncorporatedSwitching diodeDiodes Incorporated
- What it is
- Switching diode
- Maker
- Diodes Incorporated
- Package
- SOD-123
- Pins
- 2
- Source
- Published code list
Is it dead? The meter test is below: Silicon diode.
BAV20WSOD-123Switching diode, Diodes IncorporatedSwitching diodeDiodes Incorporated
- What it is
- Switching diode
- Maker
- Diodes Incorporated
- Package
- SOD-123
- Pins
- 2
- Source
- Published code list
Is it dead? The meter test is below: Silicon diode.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Silicon diode
Diode range, part lifted or one leg off the pad. Red probe on the anode.
Working, it reads
About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- Open both ways: failed open.
- A reading the wrong way round as well: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Zener diode
Diode range for the forward check, part lifted, red probe on the anode. A bench supply for the Zener voltage.
Working, it reads
About 0.6 to 0.8 V forward and open in reverse on the diode range. Its Zener voltage shows only on a supply: feed it through a resistor that sets about 5 mA, cathode to positive, read quickly, and it should hold near its rated voltage.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- Open both ways, forward too: failed open.
- Holds well off its rated voltage on the supply test: drifted.
- A soft knee, or a voltage that creeps on the supply test: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A meter's diode range stops at about 2 to 3 V, so almost every Zener reads open in reverse on it, good or bad; a 3 V meter may just show a 2.4 or 2.7 V part. Above about 3 V the meter cannot tell a Zener from a plain diode.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Printed with a code easy to misread as T3
One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.
Did you find your part?
Open this in the search to correct a character or try another package.