Skip to content

SMD code T4 in SOD-123F

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 34 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • 1N4148WSOD-123FSwitching diode, 2 pins, Formosa MicrosemiSwitching diode2 pinsFormosa Microsemi
    What it is
    Switching diode
    Maker
    Formosa Microsemi
    Package
    SOD-123F
    Pins
    2
    Pinout
    • 1 cathode
    • 2 anode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • 1N4148W-FLSOD-123FSwitching diode, 2 pins, Formosa MicrosemiSwitching diode2 pinsFormosa Microsemi
    What it is
    Switching diode
    Maker
    Formosa Microsemi
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • 1N4148W-Q1SOD-123FSwitching diode, 2 pins, Formosa MicrosemiSwitching diode2 pinsFormosa Microsemi
    What it is
    Switching diode
    Maker
    Formosa Microsemi
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • ACDBMS240-HFSOD-123FSchottky diode, 2 pins, ComchipSchottky diode2 pinsComchip
    What it is
    Schottky diode
    Maker
    Comchip
    Package
    SOD-123F
    Pins
    2
    Details
    40 V, 2 A Schottky barrier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • BAV16WSOD-123FSwitching diode, 2 pins, Formosa MicrosemiSwitching diode2 pinsFormosa Microsemi
    What it is
    Switching diode
    Maker
    Formosa Microsemi
    Package
    SOD-123F
    Pins
    2
    Pinout
    • 1 cathode
    • 2 anode
    Details
    Surface-mount fast switching diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • CDBMS240-HFSOD-123FSchottky diode, 2 pins, ComchipSchottky diode2 pinsComchip
    What it is
    Schottky diode
    Maker
    Comchip
    Package
    SOD-123F
    Pins
    2
    Details
    40 V, 2 A Schottky barrier diode
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • L1N4148FT1GSOD-123FSwitching diode, 2 pins, LRCSwitching diode2 pinsLRC
    What it is
    Switching diode
    Maker
    LRC
    Package
    SOD-123F
    Pins
    2
    Details
    Switching diode, VR 75 V, IF 150 mA, VF Max 1.25 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Silicon diode.

  • SM240FLSOD-123FSchottky diode, 2 pins, SeCoSSchottky diode2 pinsSeCoS
    What it is
    Schottky diode
    Maker
    SeCoS
    Package
    SOD-123F
    Pins
    2
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: Schottky diode.

  • 7 more parts have no package on record. Nothing rules them out, so they stay.
    • 1N4148WPSwitching diode, DiotecSwitching diodeNot recordedDiotec
      What it is
      Switching diode
      Maker
      Diotec
      Package
      Not recorded
      Pins
      Not recorded
      Details
      SMD Small Signal Switching Diodes
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • 1N4148WT-Q1Switching diode, Formosa MicrosemiSwitching diodeNot recordedFormosa Microsemi
      What it is
      Switching diode
      Maker
      Formosa Microsemi
      Package
      Not recorded
      Pins
      Not recorded
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • 1N4148WTHSwitching diode, Taiwan SemiconductorSwitching diodeNot recordedTaiwan Semiconductor
      What it is
      Switching diode
      Maker
      Taiwan Semiconductor
      Package
      Not recorded
      Pins
      Not recorded
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • CD4148WSNSwitching diode, LeiditechSwitching diodeNot recordedLeiditech
      What it is
      Switching diode
      Maker
      Leiditech
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Switching diode, 100 V
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

    • NC7WB3125L8Analog switch, onsemiAnalog switchNot recordedonsemi
      What it is
      Analog switch
      Maker
      onsemi
      Package
      Not recorded
      Pins
      Not recorded
      Details
      2-Bit Low Power Bus Switch
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Integrated circuit.

    • NTB0104GU12Logic level translator, 12 pins, NXPLogic level translator12 pinsNXP
      What it is
      Logic level translator
      Maker
      NXP
      Package
      Not recorded
      Pins
      12
      Details
      1 General description
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Integrated circuit.

    • SCS4148DF-CSwitching diode, SeCoSSwitching diodeNot recordedSeCoS
      What it is
      Switching diode
      Maker
      SeCoS
      Package
      Not recorded
      Pins
      Not recorded
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: Silicon diode.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

Silicon diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.5 to 0.8 V anode to cathode, and open the other way. Small switching diodes read about 0.6 to 0.7 V; large rectifiers can read a little lower.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • Open both ways: failed open.
  • A reading the wrong way round as well: leaky.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A three-pin body can hold two diodes. With a common pin they read two junctions from that pin, just like a transistor; in series they read two drops end to end. Test each pair the datasheet names.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Schottky diode

Diode range, part lifted or one leg off the pad. Red probe on the anode.

Working, it reads

About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.

Dead, it reads

  • The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
  • A reading the wrong way round as well: leaky.
  • Open both ways: failed open.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Integrated circuit

Voltage with the board powered; ohms from each pin to ground with it off.

Working, it reads

Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.

Dead, it reads

  • A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
  • Supply present, output stuck: failed, or its load has.
On the board:
A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
Compare:
The surest reference is the same IC on a working board, measured pin by pin.
Watch for:
Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as T4

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.