Skip to content

SMD code ES in SOT-883

Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.

Not sure which one you have?

Answer up to 4 quick questions and these 28 parts are ranked, with a meter test that settles it. It works on a dead part too.

  • ABSS84ESL-HFSOT-883P-channel MOSFET, ComchipP-channel MOSFETComchip
    What it is
    P-channel MOSFET
    Maker
    Comchip
    Package
    SOT-883
    Pins
    3
    Details
    -60 V, -0.13 A P-channel MOSFET
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: P-channel MOSFET.

  • BSS84ESLSOT-883P-channel MOSFET, Galaxy MicroelectronicsP-channel MOSFETGalaxy Microelectronics
    What it is
    P-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-883
    Pins
    3
    Details
    -60V, P Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: P-channel MOSFET.

  • GSFW0501SOT-883P-channel MOSFET, Good-ArkP-channel MOSFETGood-Ark
    What it is
    P-channel MOSFET
    Maker
    Good-Ark
    Package
    SOT-883
    Pins
    3
    Details
    P-channel MOSFET, 50 V
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: P-channel MOSFET.

  • TBSS84ESLSOT-883P-channel MOSFET, Galaxy MicroelectronicsP-channel MOSFETGalaxy Microelectronics
    What it is
    P-channel MOSFET
    Maker
    Galaxy Microelectronics
    Package
    SOT-883
    Pins
    3
    Details
    -60V, P Channel, Small Signal MOSFETs
    Source
    Manufacturer datasheet

    Is it dead? The meter test is below: P-channel MOSFET.

  • 11 more parts have no package on record. Nothing rules them out, so they stay.
    • DBTC-10-13X+RF coupler, Mini-CircuitsRF couplerMini-Circuits
      What it is
      RF coupler
      Maker
      Mini-Circuits
      Package
      Not recorded
      Pins
      Not recorded
      Details
      RF directional coupler, 5-1000 MHz
      Source
      Manufacturer datasheet

      Is it dead? The meter test is below: This part.

    • 2SC5817-SIsahaya ElectronicsNot recordedIsahaya Electronics
      What it is
      Not recorded
      Maker
      Isahaya Electronics
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Si-npn: AF-Amp, 60V, 125mA, 100mW, 200MHz, B=270..560
      Source
      Published code list

      Is it dead? The meter test is below: This part.

    • 2SD2702ROHMNot recordedROHM
      What it is
      Not recorded
      Maker
      ROHM
      Package
      Not recorded
      Pins
      3
      Source
      Published code list

      Is it dead? The meter test is below: This part.

    • BD4856FVEVoltage supervisor, ROHMVoltage supervisorROHM
      What it is
      Voltage supervisor
      Maker
      ROHM
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS-IC: Voltage Detector 5,6V, Reset Open drain output
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • BD4856GVoltage supervisor, ROHMVoltage supervisorROHM
      What it is
      Voltage supervisor
      Maker
      ROHM
      Package
      Not recorded
      Pins
      Not recorded
      Details
      CMOS-IC: Voltage Detector 5,6V, Reset Open drain output
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • BU46K304GVoltage supervisor, ROHMVoltage supervisorROHM
      What it is
      Voltage supervisor
      Maker
      ROHM
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 3.0V±1%, -Reset PPO, Rdt=400ms
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • IXD5109C43ANVoltage supervisor, IXYSVoltage supervisorIXYS
      What it is
      Voltage supervisor
      Maker
      IXYS
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 4.3V±2%, +Reset PPO
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • IXD5127C41KNRVoltage supervisor, IXYSVoltage supervisorIXYS
      What it is
      Voltage supervisor
      Maker
      IXYS
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 4.1V±0.8%, +Reset PPO, -MR, 800ms Rt delay
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • IXD5127N42ENRVoltage supervisor, IXYSVoltage supervisorIXYS
      What it is
      Voltage supervisor
      Maker
      IXYS
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 4.2V±0.8%, -Reset ODO, -MR, 800ms Rt delay
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • RP300K23AC2Voltage supervisor, RicohVoltage supervisorRicoh
      What it is
      Voltage supervisor
      Maker
      Ricoh
      Package
      Not recorded
      Pins
      Not recorded
      Details
      Voltage detector IC: 2.32V±1%, +Reset PPO, -MR, Rdt=50ms
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

    • RP602Z350CDC-DC converter, RicohDC-DC converterRicoh
      What it is
      DC-DC converter
      Maker
      Ricoh
      Package
      Not recorded
      Pins
      Not recorded
      Details
      DC/DC voltage converter IC: PWM/VFM B-boost, 3.5V±1.5%, 1.5A, 2.6MHz, +CE, CL, Reset-pr.
      Source
      Published code list

      Is it dead? The meter test is below: Integrated circuit.

Is it dead? One meter test per kind

Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.

P-channel MOSFET

Diode range, part lifted. Test drain to source first, then short gate to source and test again.

Working, it reads

Red probe on the drain, black on the source: about 0.4 to 0.9 V, the body diode. Open the other way. The gate reads open to both other pins, both ways.

Dead, it reads

  • Drain to source the same both ways, near 0 V with a continuous beep, and still so after shorting gate to source: shorted. The classic failure.
  • The gate reads low to source or drain: gate shorted. Often all three pins end up shorted together.
  • No body diode at all: failed open.
On the board
the gate usually has a resistor to the source, so gate to source reads that resistor, which is not a fault. Lift a leg to be sure.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
Watch for:
The diode range can charge the gate enough to turn the part on, and then drain to source reads near 0 both ways on a good part. Short gate to source and test again before you condemn it.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

This part

Diode range and ohms range, part lifted.

Working, it reads

Depends on what it is. The datasheet, or an identical part, says.

Dead, it reads

  • Between two pins, the same reading both ways, near 0 V with a continuous beep: shorted.
  • Open between every pair of pins: failed open, or a part that reads open when working.
On the board
this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
Compare:
If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Integrated circuit

Voltage with the board powered; ohms from each pin to ground with it off.

Working, it reads

Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.

Dead, it reads

  • A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
  • Supply present, output stuck: failed, or its load has.
On the board:
A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
Compare:
The surest reference is the same IC on a working board, measured pin by pin.
Watch for:
Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.

A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.

Printed with a code easy to misread as ES

One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.

Did you find your part?

Open this in the search to correct a character or try another package.