SMD code K46 in SOT-363
Marking codes are not standardised, and the same code is reused by unrelated makers for unrelated parts. Below is every part in our tables printed with it, and any printed with a code that is easy to misread as it, from the manufacturers' own marking tables and published code lists.
10 parts in SOT-363 are printed K46
Not sure which one you have?
Answer up to 4 quick questions and these 11 parts are ranked, with a meter test that settles it. It works on a dead part too.
BAS40DW-06SOT-363Schottky diode, SeCoSSchottky diodeSeCoS
- What it is
- Schottky diode
- Maker
- SeCoS
- Package
- SOT-363
- Pins
- 6
- Details
- 0.2A, 40V, Surface Mount Small Signal Schottky Diodes
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Schottky diode.
FMBT3946DW-Q1SOT-363Complementary transistor pair (NPN and PNP), Formosa MicrosemiComplementary transistor pair (NPN and PNP)Formosa Microsemi
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- Formosa Microsemi
- Package
- SOT-363
- Pins
- 6
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
HMMDT39467FSOT-363Complementary transistor pair (NPN and PNP), HXYComplementary transistor pair (NPN and PNP)HXY
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- HXY
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
MMDT3946SOT-363Transistor, Galaxy MicroelectronicsTransistorGalaxy Microelectronics
- What it is
- Transistor
- Maker
- Galaxy Microelectronics
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor.
MMDT3946-7-FSOT-363Complementary transistor pair (NPN and PNP), HXYComplementary transistor pair (NPN and PNP)HXY
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- HXY
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
MMDT3946-CSOT-363Transistor, SeCoSTransistorSeCoS
- What it is
- Transistor
- Maker
- SeCoS
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor.
PMBT3946YPN,115SOT-363Complementary transistor pair (NPN and PNP), HXYComplementary transistor pair (NPN and PNP)HXY
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- HXY
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor, 40 V, 0.2 A
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
TMMDT3946SOT-363Complementary transistor pair (NPN and PNP), Galaxy MicroelectronicsComplementary transistor pair (NPN and PNP)Galaxy Microelectronics
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- Galaxy Microelectronics
- Package
- SOT-363
- Pins
- 6
- Details
- 40V, 0.2A, General Purpose NPN+PNP Bipolar Transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
WT3946DWSOT-363WayonNot recordedWayon
- What it is
- Not recorded
- Maker
- Wayon
- Package
- SOT-363
- Pins
- 6
- Details
- Bipolar transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor.
HBNP3946S6RSOT-363Complementary transistor pair (NPN and PNP), CYStekComplementary transistor pair (NPN and PNP)CYStek
- What it is
- Complementary transistor pair (NPN and PNP)
- Maker
- CYStek
- Package
- SOT-363
- Pins
- 6
- Details
- 40/-40 V, 0.2/-0.2 A NPN+PNP transistor
- Source
- Manufacturer datasheet
Is it dead? The meter test is below: Bipolar transistor pair.
1 more part has no package on record. Nothing rules it out, so it stays.
KIC73D46MVoltage supervisor, KECVoltage supervisorKEC
- What it is
- Voltage supervisor
- Maker
- KEC
- Package
- Not recorded
- Pins
- Not recorded
- Details
- Voltage detector IC: 4.6V±1%, -Reset PPO, Rdt=200ms
- Source
- Published code list
Is it dead? The meter test is below: Integrated circuit.
Is it dead? One meter test per kind
Parts of the same kind are tested the same way, so each test is here once. Each part above points to its own.
Schottky diode
Diode range, part lifted or one leg off the pad. Red probe on the anode.
Working, it reads
About 0.15 to 0.45 V anode to cathode, roughly half a silicon diode, and open the other way.
Dead, it reads
- The same reading both ways round, near 0 V with a continuous beep or the same middling value: shorted.
- A reading the wrong way round as well: leaky.
- Open both ways: failed open.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A large Schottky can read about 0.1 V forward and beep like a short, and leaks a little the wrong way when good, more when warm. It is shorted only if it reads the same both ways. Measure it cold, beside an identical cold one.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Bipolar transistor pair
Diode range, part lifted. Test each transistor on its own pins, as the datasheet's pinout gives them.
Working, it reads
From the base, one probe colour reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.
Dead, it reads
- Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
- The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
- Only one junction reads, or none: a junction has failed open. It then looks like a diode.
- A reading the wrong way round, where it should be open: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Bipolar transistor
Diode range, part lifted or its base leg off the pad.
Working, it reads
From the base, one probe colour reads about 0.6 to 0.75 V to the emitter and to the collector, and open the other way round. Collector to emitter reads open both ways.
Dead, it reads
- Collector to emitter the same both ways, near 0 V with a continuous beep: shorted. The commonest failure.
- The base the same both ways to another pin, near 0 V or a middling value: a shorted junction.
- Only one junction reads, or none: a junction has failed open. It then looks like a diode.
- A reading the wrong way round, where it should be open: leaky.
- On the board
- this is a first look only: the meter reads every path between those pins, and a short can be a neighbour. Lift one leg before you condemn it.
- Compare:
- If an identical part sits elsewhere on the board, measure it the same way: that is what this one should read.
- Watch for:
- A pair of diodes with a common pin reads just like a transistor, and some transistors carry a built-in diode or resistor. The datasheet says which.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Integrated circuit
Voltage with the board powered; ohms from each pin to ground with it off.
Working, it reads
Supply pin at its voltage and the output doing what the datasheet says. Readings between pins depend on the part.
Dead, it reads
- A pin near 0 Ω to ground or to the supply pin where an identical part does not read that: failed short.
- Supply present, output stuck: failed, or its load has.
- On the board:
- A pin shorted to ground on the board can be anything on that net. Lift the pin to be sure.
- Compare:
- The surest reference is the same IC on a working board, measured pin by pin.
- Watch for:
- Its protection diodes can read like junctions between pins, even like a transistor. That proves nothing either way.
A dead part still carries its marking. A short or an open says it has failed, not that it is a different part.
Printed with a code easy to misread as K46
One character differs, and it is one that is easy to confuse under a lamp. Each code has a page of its own.
Did you find your part?
Open this in the search to correct a character or try another package.